The product's shade and actual color may differ from what is shown in the picture, as the images are for illustrative purposes. The product description is general and may not include all the product's features.
Gravity - 10A/250VAC magnetic relay with latch for Arduino and ESP32 - DFRobot DFR0996
19.06 €
3689767 AN-22838
6959420923243
Shipping 11-18 b.d.
You are interested in this product?
All about the product
Magnetic relay with latch 10 A / 250 V AC from DFRobot. Compared to other relays, it stands out in that it requires two digital pulse signals to switch the on / off state. It is compatible with the most popular microcontrollers such as ESP32, Arduino or Raspberry Pi.
Main features:
- Low power consumption - from 2.6 mW to 3.65 mW
- Quiet and interference-free operation
- Operating pulse width - 2 ms
- Supports 3.3V and 5V voltages
- Compatible with Arduino / ESP32 / Raspberry Pi / LattePanda
Specifications:
- Module type: relay
- Relay type: Magnetic relay with latch
- Supply voltage: 3.3 V to 5 V DC
- Trigger pulse width: 2 ms
- Static current: 0.73 mA to 0.8 mA
- Operating current: 137 mA / 3.3 V, 93 mA / 5 V
- Contact resistance: ≤ 100 mΩ (1 A / 6 V DC)
- Contact material: AgSnO2
- Contact load: 10 A / 36 V AC, 15 A / 36 V AC
- Maximum switching voltage: 36 V AC / 30 V DC
- Maximum switching current: 10 A
- Maximum switching power: 36 VA / 300 W
- Nominal coil power: 0.4 W
- Relay operating time (at rated voltage): ≤ 8 ms
- Relay reset time (at rated voltage): ≤ 5 ms
- Module dimensions: 42 x 32 mm
Included:
- Gravity - 10A/250VAC magnetic relay with latch for Arduino and ESP32 - DFRobot DFR0996 - 1 pc
- Connecting cable with Gravity connector - 3 pins - 1 pc.
