Оттенок товара и его реальный цвет могут отличаться от того, что показано на фотографии, так как изображения носят иллюстративный характер. Описание товара является общим и может не включать все его характеристики.
Bidirectional current/power sensor, INA219, 26V 3.2A, STEMMA AT/Qwiic, Adafruit 904
29.00 €
3597114 AN-19255
5904422379377
Доставка 8-12 р.д.
Вас заинтересовал этот товар?
Все о продукте
Bidirectional current and power sensor made by Adafruit. It has an INA219 chip built in, two STEMMA QT / Qwiic standard connectors located on both sides of the board, and wires as solder pads. Used to measure high DC voltage and current over the I2C bus with 1% accuracy. The sensor can measure a maximum voltage from 0 V to 26 V DC (regardless of 3 V or 5 V power supply). The amplifier measures the voltage across a 0.1 Ohm resistor. The maximum input difference of the amplifier is +/-320 mV, which allows you to measure current up to +/-3.2 A. Using a 12-bit ADC, the measurement resolution is 0.8 A.Specifications:
- Chip: INA219
- Module type: bidirectional current/power sensor
- Supply voltage: 3 V to 5 V
- Communication interface: I2C bus
- Interface address: 0x40 / 0x41 / 0x44 / 0x45 (jumper selectable)
- Equipped with current sensor 0.1 Ohm 1% 2 W
- Measurement ranges:
- maximum voltage measurement: from 0 V to 26 V DC
- maximum current measurement: up to +/-3.2 A with a resolution of +/-0.8 mA
- Measurement accuracy: up to 1%
- Leads:
- soldering fields
- STEMMA QT / Qwiic connectors
- Dimensions: 25.6 x 20.4 x 4.7 mm
- Bidirectional current/power sensor - INA219
- Goldpin connectors - 2.54 mm
- Terminal connector - x1
