The product's shade and actual color may differ from what is shown in the picture, as the images are for illustrative purposes. The product description is general and may not include all the product's features.
3D plastic PET-G matte (Matte) black 1.75mm 0.85kg Fiberlogy
5043620 MPET-BLACK-175-085
5902560997880
Shipping 7-12 b.d.
All about the product
Matte PET-G - durability and elegance
Matte PET-G printing filament is a new product offered by Fiberlogy. It is the answer to many 3D printing enthusiasts' requests. This modern PET-G filament features a unique matte finish. It not only gives prints a refined appearance but also effectively masks layers, improving the aesthetics of the final product.
Compared to matte PLA filaments, Matte PET-G offers significantly higher strength. This allows for the creation of strong and durable prints with an elegant look. It is perfect for designs where aesthetics are as important as filament strength.
Matte PET-G is easy to use, but to harness its full potential, a higher printing temperature of 250-270 °C is required, especially when printing at high speeds, such as with BambuLab printers. These are the key parameters that ensure optimal strength and excellent layer adhesion. To achieve the best results, we recommend increasing the number of outlines and infills in the print settings.
3D PRINTING applications:
decorations: interior design elements, figurines, jewelry, vases
HOBBY: costume elements, cosplay accessories
USAGE TOOLS: toys, desk organizers, containers
VARIOUS ACCESSORIES: phone stands, jewelry displays
Matte PET-G properties:
Matte finish
easy to print
low sensitivity to shrinkage and stringing
resistance to acids, salts, alkali substances
effectively conceals layer lines
How to print with EASY PET-G? The following parameters are merely suggestions for this material's printing settings. To ensure the best printing quality, it is necessary to select the appropriate settings for the specific printer and printing conditions.
Nozzle temperature 250-270 °C
Print bed temperature 90 °C
Enclosed chamber not necessary
Cooling 0-25%
Flow 95-105%
Print speed < 100 mm/s
Surface masking tape
Retraction (direct) 2-3 mm
Retraction (Bowden) 3-5 mm
Retraction speed 20-45 mm/s
Drying conditions 60 °C / 4 hours
Notes Due to strong bed adhesion, it is not recommended to print directly on its surface or glass. This may cause damage. We recommend using masking tape. 
