Home page > Electronics>Electronic Components>Development Boards and Modules>Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino – 2
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino – 3
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino – 4
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino – 5
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino
Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino

The product's shade and actual color may differ from what is shown in the picture, as the images are for illustrative purposes. The product description is general and may not include all the product's features.

Oem RS232 – FT232 – FTDI USB/TTL Converter – 5V/3.3V – UART – Arduino

19.31 €
5001996

AN0130

4779044512157

Shipping 5-9 b.d.

You are interested in this product?
(Read terms of service)

All about the product

FT232RL is an USB/TTL converter module from FTDI designed to convert USB standard signals from 5V to 3.3V.

rs232-ft232-ftdi-usbttl-konverteris

Features:

  • Excellent module for connecting a computer to a microcontroller. USB-UART converter (RS232 TTL) based on the FTDI FT232RL chip.
  • The module has CTS, RX, TX, DTR pins and VCC and GND power source.
  • Due to the built-in stabilizer, we can select the power voltage of the programmed system (5V or 3.3V) using a jumper.
  • NOTES:
  • - Drivers can be downloaded from the websites described below.
  • - Proper connection to the motherboard is crucial – any other connection may damage the board's electronics or the FTDI.
  • - The voltage is set to 5V by default – you can change it by replacing the jumper to 3.3V.

Specifications:

  • Uses FTDI FT232RL chip
  • Power, TX, RX LED indicators
  • Gold pin connector
  • miniUSB socket
  • All FT232RL system signal pins, 3.3 V power supply (50 mA)
  • Voltage level selection using a jumper
  • UART RS232 interface
  • Works with Windows XP/7/8, Linux