The product's shade and actual color may differ from what is shown in the picture, as the images are for illustrative purposes. The product description is general and may not include all the product's features.
3D plastic PET-G matte (Matte) gray 1.75mm 0.85kg Fiberlogy
4539365 5902560997866
Shipping 10-15 b.d.
All about the product
Matte PET-G - durability and elegance
Matte PET-G printing filament is a new product offered by "Fiberlogy". It is a response to many requests from 3D printing enthusiasts. This modern PET-G filament features a unique matte finish. It not only gives prints a refined appearance but also efficiently masks layers, enhancing the aesthetics of the final product.
Compared to matte PLA filaments, “ Matte PET-G ” offers significantly greater strength. This allows for the creation of strong and durable prints, boasting an elegant appearance. It is perfect for designs where aesthetics are as important as the strength of the filament.
Matte PET-G is easy to use, but to fully utilize its capabilities, a higher printing temperature of 250-270 °C is required, especially when printing at high speeds, such as with “BambuLab” printers. These are the key parameters that ensure optimal strength and excellent layer adhesion. To achieve the best results, we recommend increasing the number of outlines and infills in the printing settings.
3D PRINTING applications:
decorations: interior design elements, figurines, jewelry, vases
HOBBY: costume elements, cosplay accessories
USAGE TOOLS: toys, desk organizers, containers
VARIOUS ACCESSORIES: phone stands, jewelry displays
Properties of Matte PET-G:
Matte finish
easy to print
low sensitivity to shrinkage and stringing
resistance to acids, salts, alkaline substances
effectively conceals layer lines
How to print EASY PET-G? The following parameters are only recommended printing settings for this material. To ensure the best printing quality, it is necessary to select appropriate settings for the specific printer and printing conditions.
Nozzle temperature 250-270 °C
Bed temperature 90°C
Closed chamber not required
Cooling 0-25%
Flow 95-105%
Printing speed < 100 mm/s
Surface masking tape
Retraction (direct) 2-3 mm
Retraction (Bowden) 3-5 mm
Retraction speed 20-45 mm/s
Drying conditions 60 °C / 4 hours
Notes Due to strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can cause damage. We recommend using masking tape. 
