Home page > Electronics>Audio and video>UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino – 2
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino – 3
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino – 4
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino – 5
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino
UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino

The product's shade and actual color may differ from what is shown in the picture, as the images are for illustrative purposes. The product description is general and may not include all the product's features.

UNO basic KIT Starter kit – UNO R3 Starter Kit – compatible with Arduino

49.00 €
Monthly payment from 2,16 €
3818780

ABC-9584

5904384716302

Shipping 8-12 b.d.

You are interested in this product?
(Read terms of service)

All about the product

Practical beginner's kit with UNO R3. A great kit for beginners to learn programming. The kit allows you to get acquainted with basic electronic components as well as the fundamentals of microcontroller programming.

In the kit:

  • UNO R3 analog - 1 pcs.
  • Breadboard - 1 pcs.
  • 220 ohm resistor - 10 pcs.
  • 330 ohm resistor - 10 pcs.
  • 1KOhm resistor - 10 pcs.
  • 10KOhm resistor - 10 pcs.
  • Jumper wires M-M - 65 pcs.
  • USB cable - 1 pcs.
  • LM35 temperature sensor (analog) - 1 pcs.
  • Infrared receiver VS1838B - 1 pcs.
  • Photoresistor - 3 pcs.
  • 10KOhm potentiometer - 1 pcs.
  • Active buzzer - 1 pcs.
  • Passive buzzer - 1 pcs.
  • Buttons - 4 pcs.
  • Infrared remote control with 21 buttons - 1 pcs.
  • Tilt sensor SW-525 - 2 pcs.
  • Flame sensor - 1 pcs.
  • RGB LED - 1 pcs.
  • Red LEDs - 10 pcs.
  • Blue LEDs - 10 pcs.
  • Green LEDs - 10 pcs.
  • 1 digit 7-segment LED display - 2 pcs.
  • 4-digit 7-segment display - 1 pcs.
  • 8x8 LED dot matrix display - 1 pcs.
  • 40 pin header - 1 pcs.
  • 74HC register - 1 pcs.
  • Holder for 6 AA R6 batteries - 1 pcs.
Specifications:

  • Power voltage: from 7V to 12V
  • Fully compatible with Uno Rev3
  • Microcontroller: ATmega328 - operating voltage 5V
  • Maximum clock frequency: 16 MHz
  • SRAM memory: 2 kB
  • Flash memory: 32 kB (5 kB reserved for bootloader)
  • EEPROM memory: 1 kB
  • Number of IN-OUT pins: 14, including 6 PWM
  • Single pin current is 40 mA
  • Number of analog inputs: 6 (A/D converter channels)
  • Serial interfaces: UART, SPI, I2C
  • External interrupts
  • Connector: USB port
  • Soldered ISP connector
  • Board dimensions: 75x54x15mm
  • Distance between pins 2.54mm (can be mounted on breadboards)
  • Includes USB cable
  • Module fully compatible with Uno R3. (this means it can be programmed via Arduino IDE using available libraries.)
  • The module has:
  • - ATmega328 microcontroller - the system operates with a clock signal of 16MHz
  • - 14 digital inputs/outputs
  • - 6 PWM channels - e.g., to control servos/motors
  • - 6 analog inputs
  • - popular communication interfaces
  • - USB connector CH340
  • - DC power jack
  • - RESET button
  • - pins for connecting an AVR programmer.