Marimex Pool Orlando 3.05 x 0.91 m Gray, pool, foil, skimmer (10303042)

All about the product

The Orlando pool is designed for year-round use. It does not need to be disassembled and cleaned at the end of the swimming season; it just needs to be properly prepared for winter, and next year it can be prepared again for winter before the swimming season starts and used again. Everyone can enjoy swimming in their large pool. The advantages of the Orlando pool include a stable and sturdy construction, galvanized pool walls, a wide water surface, and easy management. You just need to prepare the pool location, unroll the pool mat, unpack the pool, and assemble it. After unpacking the pool, you can fill it with water within 120 minutes. The pool walls are made of corrosion-resistant steel sheet, and the pool cover is frost-resistant. We recommend covering the pool with a cover after swimming. The pool cover is replaceable – if the pool is damaged, you can purchase it as a spare part. Pool cover: the pool cover is made of soft PVC. The thickness of the floor and wall foil is 0.225 mm. Quality manufacturing will ensure long-term hassle-free use of the pool. Advantages of Orlando pools Durability The Orlando pool is made of foil stretched over sturdy steel panels. This makes it very stable and resistant to mechanical damage. Possibility of embedding The pool can be partially or fully embedded in the ground if professional landscaping guidelines are followed. This creates the impression of a landscaped garden without disturbing the terrain. Year-round solution Due to the design features, the pool in the garden is available year-round. In winter, the water is drained only partially, accessories are disconnected, and the pool is prepared for winter using pool disinfectants. Filtration connection: Both cartridge and sand filtration systems can be connected to the pool. There are openings in the pool wall for filtration connection, to which an Olympic skimmer and a 32 mm (1 1/4 inch) diameter hose are connected. For better and faster filtration, we recommend purchasing sand filtration. Part of the Orlando pool set: Orlando pool (gray steel wall, liner, and rails) Instructions Small assembly materials required for pool assembly (rails, joints, etc.) Olympic skimmer Other accessories (steps, mat, cover) must be purchased separately. The pool assembly instructions also specify accessories that are not included in the package and must be purchased separately. Pool size tolerance: Pool dimensions are approximate and may be affected by the evenness of the base or the volume of water filled. The manufacturing tolerance is 5%. Orlando pool embedding: The Orlando pool can be partially or fully embedded in the ground. To use it comfortably and safely, all construction recommendations and embedding measures must be followed. The pool must stand on a flat surface, not on a load. Before embedding, the groundwater level at the construction site should be checked and removed. It is recommended to restrict access to the pool to prevent danger to children or pets. It is also important to consider the location of the filtration and other accessories if the pool will be installed. Orlando pool maintenance: Orlando pools do not need to be cleaned during the non-swimming season; they can remain installed year-round. However, at the end of the swimming season, the pool must be prepared for winter by lowering the water below the return nozzle level, disconnecting the filtration and other accessories, and using pool preparation chemicals for winter. It is strongly recommended not to drain the entire pool and not to remove the pool liner from the pool structure. The pool may collapse and be damaged. Detailed information on preparing the pool for winter can be found in the instructions.