The product's shade and actual color may differ from what is shown in the picture, as the images are for illustrative purposes. The product description is general and may not include all the product's features.
Beetle RP2040 - board with RP2040 microcontroller - DFRobot DFR0959
20.06 €
3704234 AN-22043
6959420922673
Shipping 11-18 b.d.
You are interested in this product?
All about the product
The small Beetle board created by DFRobot features the Raspberry Pi RP2040 microcontroller. The RP2040 ARM Cortex M0+ dual-core processor with a clock speed of 133 MHz has 264 kB of RAM and supports USB 1.1. The board has large soldering pad outputs that are additionally gold-plated for easier soldering of connectors or wires. The compact dimensions of the Beetle board - 27 x 20 mm - allow it to be used in small portable devices.
Main features:
- Based on the RP2040 chip
- 2 MB of flash memory
- Compact dimensions 27 x 20 mm
- Gold-plated solder pads for easier soldering
- Programmable with C++, MicroPython, and Arduino
- 8 GPIO pins, 2x I2C, 2x UART, 1x SPI, 8x digital port, 2x analog port
- Built-in LED
- Type C USB interface
- Compatible with USB 1.1
- Chip: Raspberry Pi RP2040
- Clock speed: 133 MHz
- RAM memory: 264 KB
- Flash memory: 2 MB
- Power supply: from 3.3 V to 5 V
- Logic voltage: 3.3 V
- USB interface: Type C USB
- Interfaces:
- 8x GPIO
- 2x I2C
- 2x UART
- 8x digital port
- 2x analog port
- 1x reset button
- 1x boot button
- 1x LED
- Programming: C++, MicroPython, Arduino C, Mind+ graphical programming
- Solder pin size: 4 x 3.5 mm
- Pin pitch: 2.54 mm
- PCB material: FR-4
- Gold-plated solder joints
- Solder material: lead-free, environmentally friendly
- Dimensions: 27 x 20 x 4.91 mm
- Beetle RP2040 - board with RP2040 microcontroller - DFRobot DFR0959
- Set of gold pin connectors
