The product's shade and actual color may differ from what is shown in the picture, as the images are for illustrative purposes. The product description is general and may not include all the product's features.
ArduCam Pi camera - for remote Octoprint/Octopi monitoring from Raspberry Pi - ArduCam B0176R
39.00 €
Monthly payment from 1,90 €
3626772 AN-20605
5904422381844
Shipping 8-15 b.d.
You are interested in this product?
All about the product
Native ArduCam Pi camera with high native resolution. Designed for remote viewing of 3D prints using the Octoprint/Octopi system on Raspberry Pi. The kit includes two FFC strips: 1 x 5.9” 15 cm long and 1 x 39.4” 100 cm long. The maximum resolution of the camera is 2592x1944px, and its FOV angle: 54° x 44° (H x V). Its use is especially important for remote monitoring of the progress of the 3D printer. In addition, the camera is compatible with 3D printing software - you just need to install the appropriate drivers and configure it according to the instructions.Main features:
- Compatible with Raspberry Pi 4B / 3B+ / 3B. In addition, ArduCam has solved the problems of installing and configuring OctoPi
- Allows for better magnification and continuous focus. Minimum focus distance is approximately 5 cm
- Innovative camera focus control is enabled by the OctoPrint Control card, which uses custom commands to focus during printing
- Designed to monitor the progress of the 3D printer
- Sensor: 5 Mpx OV5647
- Maximum resolution: 2592x1944px
- IR sensitivity: built-in IR filter, visible light only
- Focus type: motorized focus
- Field of view: 54° x 44° (H x V)
- Focal length: 2''
- PCB dimensions: 25 x 24 mm
- ArduCam Pi camera for remote viewing of Octoprint/Octopi from Raspberry Pi - ArduCam B0176R
- 1 x 5.9” (15 cm) FFC ribbon for Raspberry Pi
- 1 x 39.4" (100 cm) FFC ribbon for Raspberry Pi
