Home page > Computers & Peripherals>Printers and accessories>3D Printing>3D Filaments>Plastic Rosa3D PLA Starter 1.75mm 0.80kg - gray
Plastic Rosa3D PLA Starter 1.75mm 0.80kg - gray
Plastic Rosa3D PLA Starter 1.75mm 0.80kg - gray – 2
Plastic Rosa3D PLA Starter 1.75mm 0.80kg - gray
Plastic Rosa3D PLA Starter 1.75mm 0.80kg - gray
Plastic Rosa3D PLA Starter 1.75mm 0.80kg - gray
Plastic Rosa3D PLA Starter 1.75mm 0.80kg - gray
Plastic Rosa3D PLA Starter 1.75mm 0.80kg - gray
Plastic Rosa3D PLA Starter 1.75mm 0.80kg - gray

The product's shade and actual color may differ from what is shown in the picture, as the images are for illustrative purposes. The product description is general and may not include all the product's features.

Plastic Rosa3D PLA Starter 1.75mm 0.80kg - gray

39.00 €
Monthly payment from 1,90 €
3616309

AN-20206

5907753130228

Shipping 11-18 b.d.

You are interested in this product?
(Read terms of service)

All about the product

Gray plastic made of biodegradable biopolymer. The PLA Starter line is designed for beginner 3D printer users. The material is characterized by high ease of printing while maintaining high detail of the formed 3D models. PLA Starter shows low shrinkage and good adhesion of the first printing layers. Does not emit an unpleasant odor during melting. The diameter of the filament is 1.75 mm. The weight of the material wound on the spool is 0.80 kg.

Main features:
  • Ideal choice for beginners
  • Environmentally friendly product made from biodegradable biopolymer
  • Good adhesion between layers
  • High accuracy and detail of the printed work
  • The plastic is made from ingredients approved for food contact. However, it should be remembered that in the case of food contact products, the responsibility for certification lies with the manufacturer of the final product.
  • PLA Starter plastic can be used in 3D printers that do not have unheated build plates. If you experience adhesion problems, use an adhesion promoter
Specifications:
  • Nozzle temperature: 185 °C to 225 °C
  • Workbench temperature: 40°C to 60°C
  • Print cooling: from 50% to 100%
  • Recommended print speed: 60 mm/s to 80 mm/s
  • Dimensional tolerance of heated plastic: +/- 0.05 mm
  • Oval dimensional tolerance: +/- 0.02 mm
  • Heat distortion temperature: 55 °C (ASTM E2092)
  • Density: 1.24 g/cm3
  • Tensile elongation: 6% (ASTM D882)
  • Tensile strength (break): 53 MPa (ASTM D882)
  • Modulus of elasticity: 3500 MPa (ASTM D882)
  • Odor: odorless
  • Coil material: biodegradable biopolymer
  • Coil diameter: 200 mm
  • Coil width: 55 mm
  • Mounting hole diameter: 52 mm
  • Vacuum packing: Yes
  • Moisture absorber: Yes
  • Product weight: 800g net