All about the product
2in1 700 W soldering stationModel: HM-294Strong and durable:✔ Hot air station: 700W, temperature: 100-500 degrees C.✔ Soldering station: 60 W, temperature: 200 - 500 degrees C.✔ 5 replaceable tips included!✔ Desoldering wick - 2 mm thick; length 1.5 m.✔ 10g soldering wire.✔ LCD display and easy operation.Main parameters:Brushless fan: ensures longer service life and stable operation with a gentle air flow.Temperature calibration available.Automatic sleep function (below 80°C) increases operational safety and extends the service life of the device, while saving energy.5 air nozzles allow for precise direction of the hot air flow.Desoldering wick and soldering wire included.⭐⭐⭐⭐⭐ High-quality tools from the proven HUMBERG brand.Heat gun accessories:◾ Flask for blowing hot airEquipped with a position sensor that can automatically adjust or turn off the air flow depending on the position of the stockThis is the main element of the hot air blowing system in the soldering station.◾ Nozzles of different diameters that can be attached to the stock. These nozzles are used to precisely direct the air flow.◾ Internal heater: Hot air flows through the heater and is directed through the nozzles to the components being soldered.◾ Multi-pin connector for connection: Provides power to the supplies and controls the air flow and temperature.Soldering iron accessories:◾ Soldering iron: For precision soldering. At the end of the flask there is a tip that is heated to a high temperature. The tip is conical, so you can work precisely with small components, such as SMD elements. ◾ Soldering iron holder: A safe place to place a hot soldering iron when not in use. ◾ Tip cleaning sponge: The sponge inserted into the base of the stand is designed to clean the soldering tip from excess tin and dirt that may accumulate during operation. ✔ The station has two operating modes: soldering iron and hot air blowing. Each of these modes has a different purpose, and their combination in one device makes the station universal. Soldering iron and hot air gun - one device. Soldering iron mode: Temperature: 200-500 CMaximum power: 60 W Heat gun mode: Temperature: 100-500 CMaximum power: 700 W ◾ Hot air blowing mode:Advantages:Precise temperature and air flow control: Ability to adjust the temperature in the range from 100 to 500°C and change the air flow.Even heating: Hot air heats the entire surface of the elements, so they can be easily removed without the risk of mechanical damage.Destiny: Desoldering SMD components.BGA reflow.Heating shrink films and thermosetting adhesives.Repairing integrated circuits.◾ Soldering iron mode:Advantages:Precise soldering: The soldering iron provides controlled heat when mounting components on a PCB.When you need a lower temperature than hot air: without the risk of damaging other nearby components.Destiny:Working with wires and connectors.Soldering through-hole elements (THT).Small SMD components.Hot air bulb holder (hot air station):Working mode indicators (rework / soldering):◾ Rework: Indicates that the hot air blowing mode is currently active.◾ Soldering: means that the soldering iron mode is active, i.e. classic soldering with a tip.Temperature control buttons:◾ UP: increases the set temperature.◾ DOWN: decreases the set temperature.◾ SET: Used to confirm the selected temperature or to switch operating modes.Connector for connecting the hot air gun and soldering iron.Air blowing force adjustment (air):Soldering iron mode switch and hot air mode switch.✔ Easy to use - a convenient handle for placing supplies and a clear LCD display - all this ensures greater comfort of work!Technical data:Hot air station power: 700 WAir temperature range: 100-500°CSoldering iron power: 60 WSoldering iron temperature range: 200-500°CBrushless fan with gentle air flow5 different sized air nozzlesTemperature calibration possibleSleep function below 80°C temperatureAccessories: desoldering wick (2 mm, 1.5 m), soldering wire (10 g)LCD displayTwo modesPower supply: 230 V
