Adafruit Feather RP2040, board with RP2040 microcontroller
Adafruit Feather RP2040, board with RP2040 microcontroller – 2
Adafruit Feather RP2040, board with RP2040 microcontroller – 3
Adafruit Feather RP2040, board with RP2040 microcontroller – 4
Adafruit Feather RP2040, board with RP2040 microcontroller
Adafruit Feather RP2040, board with RP2040 microcontroller
Adafruit Feather RP2040, board with RP2040 microcontroller
Adafruit Feather RP2040, board with RP2040 microcontroller

The product's shade and actual color may differ from what is shown in the picture, as the images are for illustrative purposes. The product description is general and may not include all the product's features.

Adafruit Feather RP2040, board with RP2040 microcontroller

31.10
3602131

AN-19312

5904422346423

Shipping 11-18 b.d.

You are interested in this product?
(Read terms of service)

All about the product

The Adafruit Feather RP2040 is a board with the RP2040 microcontroller. The chip has two ARM Cortex M0+ cores operating at up to 133 MHz, 264 kB RAM, 8 MB of external memory connected via the QSPI interface. The board does not have integrated FLASH memory. It has 2x I2C, 2x SPI and 2x UART interfaces and 16 PWM channels.

Main features:
  • Two ARM Cortex-M0+ cores running at up to 133 MHz
  • 264 kB on-chip SRAM
  • Supports up to 16 MB of external Flash memory via QSPI bus
  • DMA controller
  • Fully connected AHB crossbar
  • Peripherals with interpolator and integer divider
  • Programmable LDO chip for voltage generation
  • 2 on-chip PLLs for clock generation, USB and kernel
  • 30 GPIO pins (4 of which can be used as analog inputs)
  • Interface:
    • 2x UARTs
    • 2x SPI
    • 2x I2C
    • 16 PWM channels
    • USB 1.1 and PHY controller supporting host and device
    • 8 PIO state machines
Specifications:
  • Microcontroller RP2040
  • 32-bit dual-core Cortex M0+
  • Supply voltage: 3.3V
  • 264KB RAM
  • 8 MB external FLASH memory
  • No EEPROM memory
  • 21x GPIOs:
    • 4x 12-bit ADCs
    • 2x I2C, 2x SPI and 2x UART, (1 marked as the main interface in standard Feather
    • places)
    • 16x PWM outputs - for servos, LEDs, etc.
    • 8 digital GPIOs
  • 200 mA Li-Pol battery power connector with LED charging status indicator
  • LED and RGB NeoPixel
  • STEMMA QT connector compatible with Qwiic, STEMMA QT, Grove
  • SWD interface connector
  • Reset button and Bootloader button
  • Voltage regulator 3.3 V / 500 mA
  • USB-C connector
  • 4 mounting holes
  • Supported programming languages: MicroPython, CircuitPython and C/C++
  • Product dimensions: 51 x 23 x 7.5 mm
  • Net product weight: 5 g
Included:
  • Feather RP2040 - Adafruit 4884
  • 2x gold-plated pin connectors 2x16 pitch 2.54 mm