The product's shade and actual color may differ from what is shown in the picture, as the images are for illustrative purposes. The product description is general and may not include all the product's features.
3D plastic PET-G matte blue 1.75mm 0.85kg Fiberlogy
3562435 MPET-BLUE-175-085
5902560998832
Shipping 10-15 b.d.
All about the product
Matte PET-G - durability and elegance
Matte PET-G printing filament is a new product offered by Fiberlogy. It is the answer to many requests from 3D printing enthusiasts. This modern PET-G filament features a unique matte finish. It not only gives prints a sophisticated look, but also effectively masks layers, improving the aesthetics of the final product.
Compared to matte PLA filaments, Matte PET-G has a much higher strength. This allows for strong and durable prints with an elegant appearance. It is perfect for designs where aesthetics are as important as the strength of the filament.
Matte PET-G is easy to work with, but to fully exploit its potential, higher print temperatures of 250-270°C are required, especially when printing at high speeds, such as on BambuLab printers. These are key parameters to ensure optimal strength and excellent layer adhesion. For best results, we recommend increasing the number of outlines and fills in the print settings.
3D PRINTING APPLICATIONS:
decorations: interior design elements, figurines, jewelry, vases
HOBBY: costume elements, cosplay accessories
USES: toys, desk organizers, containers
MISCELLANEOUS ACCESSORIES: phone stands, jewelry displays
Properties of matte PET-G:
Matte finish
easy to print
low susceptibility to shrinkage and cord formation
resistance to acids, salts, alkaline substances
perfectly hides layer lines
How to print EASY PET-G? The parameters listed below are only suggested print settings for this material . To ensure the best print quality, it is necessary to select the appropriate settings for your specific printer and printing conditions.
Nozzle temperature 250-270 °C
Printing plate temperature 90°C
Closed camera not necessary
Cooling 0-25 percent.
Flow 95-105%
Print speed < 100 mm/s
Surface masking tape
Retraction (direct) 2-3 mm
Retraction (Bowden) 3-5 mm
Retraction speed 20-45 mm/s
Drying conditions 60 °C / 4 hours.
Notes Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This may cause damage. We recommend using masking tape. 
