Insera Muffle 26" fat bike, 48 cm

Insera Muffle 26" is an aluminum-framed fatbike designed in Finland. The selection of components has taken into account Finland's demanding weather conditions. Muffle 26" is intended for fatbike riders who are just starting out and for occasional cyclists who enjoy nature. With Muffle, you can comfortably experience the more challenging trails of your local forest with wide 4-inch tires. The air space of the 26"x4.00" tires is massive compared to a normal bike tire, and this brings the riding comfort to its own level when you go cycling on uneven terrain. The reliable Shimano 21-speed gearbox and reliable mechanical disc brakes bring safety and the opportunity to choose a more challenging off-road route or crossing a snowy open field.

Technical information:

• Frame size: 48 cm (19")
  
• Recommended rider height: 170 - 185 cm
• Frame: aluminum, QR
  
• Front fork: Steel, QR
  
• Cranks: 170 mm, three-wheel
• Center: BSA cassette
• Front derailleur: Shimano FD310
  
• Rear derailleur: Shimano Acera, 7-y
• Rear pack: MF-TZ500-7-sp, 14-28H
  
• Gear lever: Shimano Revoshift 7 gears
• Disc brakes: Logan mechanical disc brake, 160mm brake discs
  
• Rims: Aluminum
• Handlebar: aluminum
• Handlebar bracket: 60mm ahead set
• Seat bracket: 30.4/300mm aluminum
  
• Saddle: Insera MTB
• Pedals: flat mtb
• Tires: Fat 26" (100-559)
  

The bike is delivered in the factory packaging, assembled almost ready to ride. If nothing else is stated for the bike, the level of stacking is 95%. With a few steps, you can get the bike ready to ride .

When installing the pedals, it is recommended to put grease or oil on the threads. You have to be careful that the left and right pedals go in the right direction. Start tightening with your fingers and only use the tool at the end. Tighten the pedals carefully.

Check the brake and gear adjustments before the first ride.

Small parts such as the clock and reflectors are generally loose, remember to install them for safe movement. Read more assembly tips.

We recommend that the bike is first serviced after 100-300 km of driving at a specialist bike service shop. If you have trouble getting the bike ready for riding, you should contact an expert bike service.

Product availability may vary. The manufacturer reserves the right to make changes regarding colors, materials, components, technical data and models. The degree of completion, components and technical data may vary for different production batches.

Degrees of stacking:

• 98% "ready to ride" - E tire ring , pedals and seat post are not installed. The handlebar bracket must be turned to the correct position and tightened. The gears and brakes are already adjusted at the factory.
• 95% - E tire, pedals, seat post and handlebar are not installed . Check the tightness of the bolts and nuts. The gear and brake adjustments are ready except for fine tuning.
• 90% - Front tire, pedals, seat post and handlebar are not installed. The fenders and possible body are not installed. Check the tightness of the bolts and nuts. The adjustments of the gears and brakes are probably not correct.