Intellinet PoE-Powered 5x Gigabit
Intellinet PoE-Powered 5x Gigabit – 2
Intellinet PoE-Powered 5x Gigabit – 3
Intellinet PoE-Powered 5x Gigabit – 4
Intellinet PoE-Powered 5x Gigabit – 5
-2%
Intellinet PoE-Powered 5x Gigabit
Intellinet PoE-Powered 5x Gigabit
Intellinet PoE-Powered 5x Gigabit
Intellinet PoE-Powered 5x Gigabit
Intellinet PoE-Powered 5x Gigabit

The product's shade and actual color may differ from what is shown in the picture, as the images are for illustrative purposes. The product description is general and may not include all the product's features.

Intellinet PoE-Powered 5x Gigabit

91,52 €
89.52 €
Monthly payment from 3,21 €
1541039

561082

0766623561082

Shipping 11-16 b.d.

You are interested in this product?
(Read terms of service)

All about the product

Save installation time and money with PoE and get the most out each PoE connection with PoE passthrough!


The Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch with PoE Passthrough is designed to take power from a PoE switch and pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with five Gigabit Ethernet ports, this switch can power up to four wireless LAN access points and bridges, VoIP phones or IP video cameras, draw its own power from the PoE switch it is connected to, and deliver network speeds of up to 1,000 Mbps.



The Perfect Workgroup Switch

When you connect the PD port (port 1) to a PoE+ enabled IEEE 802.3af/at compliant PoE switch, the Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch uses some of the electric current to power itself and passes the available surplus power to up to four PoE edge devices, such as VoIP phones, allowing you to realise the full potential of each of the PSE ports in your data centre.



Power over Ethernet 802.3at

The Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch with PoE Passthrough supports the IEEE 802.3at protocol and is designed to inject up to 25 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimising the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.



Eliminate Bottlenecks with Gigabit Speeds

Equipped with five auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, the Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch with its 10 Gbps switch fabric provides plenty of performance for your computers and other networking devices.



Green Ethernet Technology

More often than not, a network switch does not utilize all its ports at all times. When a computer, notebook, network printer or other network device is powered down, the switch continues to consume the same amount of power as if it were active. Thanks to the new energy-efficient IEEE 802.3az technology, the Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch with PoE Passthrough detects link status to all connected devices and reduces the power usage of ports not in use. In addition, the Intellinet Network Solutions switch can adjust the level of power output based on the length of the network cable connected to a particular port. With the Intellinet Network Solutions 5-Port Gigabit PoE+ Passthrough Switch you will enjoy maximum network performance, but when things slow down it automatically scales back power usage to conserve energy and save money.


* Total PoE budget for this switch is 68 watts when using the included AC power adapter. This brings the maximum per-port power distribution to 17 watts. When using the PD port to provide power, the total power budget is 26 watts (6.5 watts per port). The maximum per-port power usage cannot exceed 30 watts.
Network
Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3x
Flow control support Yes
Auto MDI/MDI-X Yes
Security
MAC address table 2048 entries
Design
LED indicators Power, Activity, Link
Product colour Black
Housing material Metal
Power
AC input voltage 100 - 240 V
AC input frequency 50 - 60 Hz
Power over Ethernet (PoE) Yes
Operational conditions
Operating temperature (T-T) 0 - 40 °C
Storage temperature (T-T) 0 - 70 °C
Operating relative humidity (H-H) 10 - 90%
Weight & dimensions
Width 140 mm
Depth 78 mm
Height 28 mm
Weight 600 g
Other features
Input current 2.5 A
Certificates
Certification FCC Class B, CE, RoHS
Logistics data
Harmonized System (HS) code 85176990
Packaging content
Cables included AC
Manual Yes