Anodas Electronics Large Arduino Starter Kit – 47 Elements
Anodas Electronics Large Arduino Starter Kit – 47 Elements

Оттенок товара и его реальный цвет могут отличаться от того, что показано на фотографии, так как изображения носят иллюстративный характер. Описание товара является общим и может не включать все его характеристики.

Anodas Electronics Large Arduino Starter Kit – 47 Elements

139.00
Мес. плата от 4,48 €
3667493

AN-05413

5903351240208

Доставка 11-18 р.д.

Вас заинтересовал этот товар?
(Прочитать условия обслуживания)

Все о продукте

A set of electronic components to help you work with Arduino modules. The kit contains more than 45 elements, including LEDs, resistors, various sensors, chips, relays and an LCD display, a motor with wheels and a controller, a large breadboard with a set of wires.

Included:
  • Layout board 830 fields
  • Resistor set (200 pcs)
  • LED set 5 mm, 10 pcs with resistors
  • LED RGB common anode
  • Connecting wires 65 pcs pin-pin
  • Connecting wires pin-socket - 20 pcs
  • Socket-to-socket connecting cables - 20 pcs.
  • Gold pin set, pitch 2.54 mm
  • Holder for 4 AA (R6) batteries with cover and switch
  • Four AA batteries
  • Tact-switch type buttons - 5 pcs.
  • Rectifier diode 1N4007 1 A / 1000 V
  • Rotary potentiometer 10 kOhm linear
  • Power supply module MB102 for breadboards - 3.3 V / 5 V
  • Converter step down LM2596 3.2 V - 35 V / 3 A
  • Soil moisture sensor
  • PIR motion sensor HC-SR501
  • Distance sensor
  • Temperature and humidity sensor DHT11 - module + wires
  • Digital temperature sensor DS18B20
  • Analog temperature sensor LM35
  • Limit switch with lever
  • Relay module with optoelectronic isolation
  • Network Ethernet module ENC28J60
  • SD card reader
  • Module with active sound signal and generator
  • WiFi module ESP-01 ESP8266
  • Radio module 4 channels 315MHz + remote control
  • Bluetooth module HC-05 v2
  • Numeric keypad
  • Photoresistor
  • Ceramic capacitor - 100 nF / 50 V THT - 10 pcs
  • Electrolytic capacitor 100 uF / 35 V 6 x 12 mm 105C THT - 10 pcs
  • Transistor NPN BC547 (5 pcs.)
  • Mosfet, type IRL540N TNT
  • LCD display 16x2 with blue or green backlight
  • I2C converter
  • Voltage converter
  • Sliding register
  • PCF8574 expander
  • Servo, type micro
  • Wheel with motor - x2
  • DRV8835 - dual-channel motor controller
  • Switching power supply 12 V
  • 1 m long USB cable AB
  • Case to make it easier to carry the kit