Anodas Electronics Large Arduino Starter Kit – 47 Elements
Anodas Electronics Large Arduino Starter Kit – 47 Elements

Toote toon ja tegelik värvus võivad erineda pildil kujutatust, kuna pildid on illustratiivse iseloomuga. Samuti on toote kirjeldus üldine ega pruugi sisaldada kõiki toote omadusi.

Anodas Electronics Large Arduino Starter Kit – 47 Elements

139.00
Kuumakse alates 4,48 €
3667493

AN-05413

5903351240208

Tarneaeg 11-18 t.p.

Kauba vastu huvi?
(Lugege teenusetingimusi)

Kõik toote kohta

A set of electronic components to help you work with Arduino modules. The kit contains more than 45 elements, including LEDs, resistors, various sensors, chips, relays and an LCD display, a motor with wheels and a controller, a large breadboard with a set of wires.

Included:
  • Layout board 830 fields
  • Resistor set (200 pcs)
  • LED set 5 mm, 10 pcs with resistors
  • LED RGB common anode
  • Connecting wires 65 pcs pin-pin
  • Connecting wires pin-socket - 20 pcs
  • Socket-to-socket connecting cables - 20 pcs.
  • Gold pin set, pitch 2.54 mm
  • Holder for 4 AA (R6) batteries with cover and switch
  • Four AA batteries
  • Tact-switch type buttons - 5 pcs.
  • Rectifier diode 1N4007 1 A / 1000 V
  • Rotary potentiometer 10 kOhm linear
  • Power supply module MB102 for breadboards - 3.3 V / 5 V
  • Converter step down LM2596 3.2 V - 35 V / 3 A
  • Soil moisture sensor
  • PIR motion sensor HC-SR501
  • Distance sensor
  • Temperature and humidity sensor DHT11 - module + wires
  • Digital temperature sensor DS18B20
  • Analog temperature sensor LM35
  • Limit switch with lever
  • Relay module with optoelectronic isolation
  • Network Ethernet module ENC28J60
  • SD card reader
  • Module with active sound signal and generator
  • WiFi module ESP-01 ESP8266
  • Radio module 4 channels 315MHz + remote control
  • Bluetooth module HC-05 v2
  • Numeric keypad
  • Photoresistor
  • Ceramic capacitor - 100 nF / 50 V THT - 10 pcs
  • Electrolytic capacitor 100 uF / 35 V 6 x 12 mm 105C THT - 10 pcs
  • Transistor NPN BC547 (5 pcs.)
  • Mosfet, type IRL540N TNT
  • LCD display 16x2 with blue or green backlight
  • I2C converter
  • Voltage converter
  • Sliding register
  • PCF8574 expander
  • Servo, type micro
  • Wheel with motor - x2
  • DRV8835 - dual-channel motor controller
  • Switching power supply 12 V
  • 1 m long USB cable AB
  • Case to make it easier to carry the kit