The product's shade and actual color may differ from what is shown in the picture, as the images are for illustrative purposes. The product description is general and may not include all the product's features.
eSUN PLA-LW Polylactic acid (PLA) Black 1 kg
55.58 €
Monthly payment from 2,33 €
3987592 PLA-LW175B1P1
6922572201491
Shipping 9-14 b.d.
You are interested in this product?
All about the product
Light weight pla filament is a material specially developed for aeromodelling. The interlayer bonding is stable, and the foaming rate and strength can be controlled by adjusting the printing temperature. PLA-LW use active foaming technology to achieve lightweight, low-density PLA parts, the foaming volume ratio is 220%, and the density is as low as 0.54g/cm3.Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. Under the same model and at the same speed, the Light weight pla filament enables the model aircraft to have a lighter wing load and a lower stall speed, which can greatly improve the performance of the model aircraft.
Features | |
| Printing material | Polylactic acid (PLA) |
| Printing colours | Black |
| Print speed | 300 mm/sec |
| Impact strength | 8.58 kJ/m² |
| Flexural modulus | 1701 MPa |
| Flexural strength | 41.31 MPa |
| Elongation at break | 68.9% |
| Maximum extruder tip temperature | 270 °C |
| Minimum extruder tip temperature | 190 °C |
| Tensile strength | 32200 kPa |
| Bulk density | 1.2 g/cm² |
Weight & dimensions | |
| Weight | 1 kg |
| Diameter | 1.75 mm |
Packaging data | |
| Quantity per pack | 1 pc(s) |
