Marimex Swimming Pool Orlando 3.66x0.91m - Gray + Skimmer (10340217)

All about the product

The Orlando pool is a pool designed for year-round operation. It does not need to be dismantled and cleaned after the swimming season, but it is enough to winterize it properly and then re-winterize it the next year before the swimming season and start using it again. Everyone can enjoy swimming in their own large pool. The advantages of the Orlando pool are its stable and solid construction, galvanised pool wall, wide water surface and easy operation. All you have to do is prepare the pool site, roll out the pool mat, unpack the pool and assemble it. From unpacking the pool, you can be filling the water within 120 minutes. The pool walls are made of corrosion-resistant steel sheet, and the pool liner is frost-resistant. We recommend covering the pool with a cover after swimming. The pool liner is replaceable - if the pool is damaged, you can buy it as a spare part. You can connect both cartridge and sand filtration to the pool. To connect the filtration, there are passages through the pool wall to which the Olympic skimmer and a 32 mm (5/4") diameter hose are connected. For better and faster filtration, we recommend purchasing a sand filtration. Part of the Orlando pool package:- Orlando pool (steel wall, liner and rails)- instructions- small installation material needed to build the pool (rails, connectors, etc.)- Olympic skimmer Other accessories (steps, mat, cover) must be purchased separately. The instructions for assembling the pool also include accessories that are not included in the package and must be purchased separately. The Orlando pool can be partially or fully in-ground. For comfortable and safe use, all construction recommendations and measures for recessing must be observed. The pool must stand on level ground, not on a load. The groundwater level at the construction site must be verified and eliminated prior to embedment. It is recommended to restrict access to the pool so that it is not a hazard to children or animals. It is also important to think about the location of filtration and other accessories in case of embedment. The dimensions of the pool are only approximate and may be affected by the flatness of the substrate or the volume of water to be filled. The manufacturing tolerance is 5%. Pool diameter: 3.66 m Pool height: 0,91 m Water depth: 0,8 m Total volume of water in the pool: 8 m3