Marimex Pool Orlando 4.57x1.07 m - Gray, pool, foil, skimmer (10303044)

All about the product

The "Orlando" pool is designed for year-round use. It does not need to be disassembled and cleaned at the end of the swimming season; it is enough to prepare it properly for winter, and the following year, prepare it again for swimming season and start using it again. By leaving the pool in the garden during the off-season, you will save time, money on water, and most importantly, the water itself. If you prepare the pool for winter outdoors, more than 80% of the water will remain in the pool and will be reused next season. This is an eco-friendly solution for preparing the pool for winter. Other advantages of the "Orlando" pool include a stable and sturdy construction, a galvanized pool wall, a wide water level, and easy management. You just need to prepare the pool area, unroll the pool mat, unpack the pool, and assemble it. Once the pool is unpacked, you can fill it with water within 120 minutes. The pool walls are made of corrosion-resistant steel sheets, and the pool cover is frost-resistant. We recommend covering the pool with a cover after swimming. The pool liner is replaceable – if the pool is damaged, it can be purchased as a spare part. Everyone can enjoy swimming in their large pool. Pool liner: The pool liner is made of softened PVC. Quality manufacturing will ensure long-term hassle-free use of the pool. Wall thickness: 0.225 mm / bottom thickness: 0.225 mm Inner foil motif = blue outer foil motif = blue Advantages of "Orlando" pools Durability The "Orlando" pool consists of a foil stretched over sturdy steel panels. This makes it very stable and resistant to mechanical damage. Possibility to embed The pool can be partially or fully embedded in the ground if professional landscaping guidelines are followed. This creates the impression of a well-kept garden without disturbing the terrain. Year-round solution Due to the design features, the pool remains in the garden year-round. In winter, the water is only partially drained, accessories are disconnected, and the pool is prepared for winter using pool disinfectants. Saving money and water Preparing the pool for winter outdoors saves water resources and reduces water and sewage costs. Properly cleaned pool water will last until the next swimming season, and the pool will not need to be completely refilled. Filtration connection: You can connect either a cartridge or sand filtration system to the pool. There are outlets in the pool wall for filtration connection, to which the "Olympic" skimmer and a 32 mm (1 1/4 inch) diameter hose can be connected. For better and faster filtration, we recommend purchasing a sand filtration unit. Part of the "Orlando" pool set: "Orlando" pool (steel wall, liner, and rails), instructions, small installation materials needed for pool assembly (rails, connectors, etc.), "Olympic" skimmer. Other accessories (ladders, mat, cover) must be purchased separately. The pool is also suitable for use with saltwater, and a saltwater chlorinator can be connected to it (if the filtration system's power is sufficient for the chlorinator). The pool assembly instructions specify accessories that are not included in the package and must be purchased separately. Pool size tolerance: Pool dimensions are approximate and may be affected by ground level or the volume of water filled. The manufacturing tolerance is 5%. Embedding the "Orlando" pool: The "Orlando" pool can be partially or fully embedded in the ground. For comfortable and safe use, all construction recommendations and embedding measures must be followed. The pool must stand on a level surface, not on... load. Before installation, the groundwater level must be checked and removed from the construction site. It is recommended to restrict access to the pool to prevent danger to children or animals. When installing, it is also important to consider the location of filtration and other accessories. Maintenance of Orlando pools: Orlando pools do not need to be cleaned during the off-season; they can remain installed year-round. However, at the end of the swimming season, the pool must be prepared for winter – drain the water so that the water level is about 10 cm below the skimmer, and close the return fitting with a plug. Disconnect the filtration and other accessories and add pool winter preparation chemicals to the pool. If you cannot disconnect the hoses, lower the water level 10 cm below the return fitting. After that, the water must be drained from the hoses to prevent them from being damaged by frost. It is strongly recommended not to empty the entire pool and remove the pool liner from the pool structure. The pool may collapse and be damaged. Detailed information on preparing the pool for winter can be found in the instructions. Dimensions of a packaged product: height – 38.00 cm; width – 110.00 cm; length - 38.00 cm; weight: 59.00 kg.