Оттенок товара и его реальный цвет могут отличаться от того, что показано на фотографии, так как изображения носят иллюстративный характер. Описание товара является общим и может не включать все его характеристики.
PrimaCreator Resin Cleaner - 500ml
39.00 €
Мес. плата от 1,90 €
3642317 PRM-5986
7340002112961
Доставка 11-18 р.д.
Вас заинтересовал этот товар?
Все о продукте
If you are looking for an effective and safe solution to clean 3D printed resin models, PrimaCreator Resin Cleaner is the right product for you.Immerse the model in the resin cleaner for 10-15 minutes, shaking/agitation every 2 minutes to loosen any uncured resin. Using an ultrasonic cleaner or cleaning station will make the process much faster.
Check periodically to make sure all uncured resin has dissolved. If satisfied, rinse the product with water to remove excess resin remover.
Dry the model according to your resin instructions. Resin cleaner can be used multiple times, replace if cleaning effectiveness decreases.
Main features:
- The resin remover does not have an unpleasant pungent odor.
- Resin remover breaks down uncured resin and dissolves it in minutes
- The resin remover is non-hazardous, non-flammable and evaporates slowly to minimize product loss during operation.
- Resin cleaner can be used with almost any DLP or SLA resin
- Flashpoint: ASTM D 3828; 75 °C (1013 hPa)
- Boiling point: 189.6 °C (1013 hPa)
- Auto-ignition temperature: 207 °C (1013 hPa)
- Density at 23 °C: MVPF 18; 0.9539 g/cm3 (20 °C)
