PREMIUMCORD HDMI2.0 Wireless extender 4K@60Hz na 50m, band 5.2GHz

PremiumCord HDMI2.0 wireless extender 4K@60Hz up to 50m, 5.2GHz frequency band

- Supports wireless 4K@60Hz and Full HD 1080p resolution transmission up to 50 m away
- Fully supports HDMI2.0 and
- Supports HDCP1.4 and HDCP2.2
- Maximum transfer speed: 18 Gbps
- Maximum resolution: 4K@60Hz FULL HD 1080p or lower supported formats 1080i/720p/720i
– Maximum resolution: 3840 x 2160 @ 24/30/50/60Hz, 1080p@50/60Hz, 720p@50/60Hz, 1920x1200, 2560x1440, 2560x1600
- Transmits IR signals to control the source device with an IR remote control
- Both the transmitter and receiver have a channel button, pressing it will change the transmission frequency, allowing it to operate on multiple wireless devices simultaneously
- Simple assembly without additional SW
- Transmitter connections: HDMI input, HDMI output for local monitor and IR control connector (cable with IR sensor included)
- Receiver connections: HDMI output connector for remote monitor and IR control connector (cable with IR sensor included)
- Transmitter and receiver have two detachable antennas
- The transmitter has a local HDMI output connector for a local HDMI monitor
- Latency less than 130-180 ms
- Operating temperature -20 to 60°C
- Humidity: 0-90% (non-condensing)
- Dimensions: TX: 115mm x 125mm x 20.6mm, RX: 115mm x 125mm x 20.6mm
- The extender is powered by the included 5V/2A power adapter
- The transmission distance depends on the actual environment.
- Surge protection: ESD protection 1a contact discharge level 3, 1b air discharge level 3, standard: IEC61000-4-2

Accessories see attached accessories photo
- four antennas
- two power supplies
- two IR cables
- instructions

Wireless HDMI2.0 signal transmitter and receiver in the 5.18-5.24 GHz frequency band