Оттенок товара и его реальный цвет могут отличаться от того, что показано на фотографии, так как изображения носят иллюстративный характер. Описание товара является общим и может не включать все его характеристики.
FLORA smart clothing controller, compatible with Arduino, Adafruit 659
39.00 €
Мес. плата от 1,90 €
3594312 AN-03162
5904422354060
Доставка 11-18 р.д.
Вас заинтересовал этот товар?
Все о продукте
A small, round module with an AVR Atmega 32u4 microcontroller is designed to support smart clothing. Thanks to the miniUSB connector, as well as the loaded bootloader, the module can be programmed directly from the Arduino IDE environment. The board has small dimensions (diameter 45 mm, height 7 mm), it can be powered from 3.5 V to 16 V.
Specifications:
- Supply voltage: 3.5V to 5V
- Microcontroller Atmega32u4:
- Flash memory: 8 KB (of which 2.75 KB is occupied by the bootloader)
- SRAM: 512 bytes
- EEPROM: 512 bytes
- Clock frequency: internal oscillator 8 MHz
- Arduino bootloader (Leonardo) installed
- Works with a modified version of the Arduino IDE
- Mini-USB connector for programming
- Equipped with a 3.3 V voltage regulator that supplies up to 150 mA of current
- Power supply from USB port or from external source with automatic switching system
- The board consists of four control LEDs: power, bootloader control, and RX and TX pins
- RESET button
- Power displayed on JST connector
- Possibility to solder the ICSP connector to an external programmer
- Diameter: 45 mm
- Height: 7 mm
- Weight: approximately 5 g
Links:
Manufacturer's page
Manual
