Оттенок товара и его реальный цвет могут отличаться от того, что показано на фотографии, так как изображения носят иллюстративный характер. Описание товара является общим и может не включать все его характеристики.
Oem RGB LED strip WS2811- 60LED/m 12V - 5m
3583260 AN-05811
5904422334017
Доставка 8-11 р.д.
Все о продукте
Each pixel, consisting of three RGB LEDs, can emit colors from a 24-bit palette. A single microcontroller pin (e.g. Arduino) is sufficient to control the module. The diodes are densely arranged at a distance of about 17mm, which ensures high brightness. The system is powered by 12V, consuming approximately 1.2A per meter (14.4W). The circuit can be cut every third diode. The communication protocol used allows for serial connection of the LEDs. Another circuit should be connected to the output connector, connecting 12V, GND and DOUT to DIN, respectively. The manufacturer indicates that when using more than 500 diodes, the RAM in the Arduino Uno system may not be enough. It should also be noted that for each subsequent matrix, it will be necessary to increase the efficiency of the power source.
Specification:
- Power supply voltage: 12V
- Power: 14.4 W/m
- Power consumption: approximately 1.2A per 1 meter of circuit
- Diodes used: LED RGB SMD5050 WS2811
- Address point size: 3 LEDs
- IP class: IP65 (silicone cover)
- Tape length: 5m
