3D plastic ABS+ white 1.75mm 1kg Rosa3D

ABS+ material is a widely used engineering plastic with low shrinkage (0.4-0.7%).

Excellent processing properties such as good flow, bright, vivid colors and very good layer adhesion allow this filament to be used in a variety of applications. ABS+ has high impact resistance. ABS+ from ROSA3D gives prints an elegant semi-matte finish. It can be smoothed with acetone.

extruder temperature: 230-270 °C

bearing temperature: 80-110 °C

It is recommended to use a heated bed and print with a closed-body printer. For most printers, print cooling should be turned off. The fan speed should be adjusted based on the capabilities of the printer and the geometry of the object being printed.

Diameter: 1.75mm

Net weight: 1000g

The filament is vacuum packed with a desiccant.

Density: 1.05 g/cm3

Odor: irritating

Tensile elongation: 2.5%.

Tensile strength (until breaking): 44 MPa

Tensile modulus: 2276 MPa

Thermal distortion temperature: 99