Оттенок товара и его реальный цвет могут отличаться от того, что показано на фотографии, так как изображения носят иллюстративный характер. Описание товара является общим и может не включать все его характеристики.
Unsorted Flipper Zero – Basic – Multifunctional Bluetooth/RFID/RF/IR/GPIO/1-Wire Tool
379.01 €
Мес. плата от 10,66 €
3557064 FLP-Z-W-R04
0196852482856
Доставка 6-11 р.д.
Вас заинтересовал этот товар?
Все о продукте
Flipper Zero is an advanced all-in-one device for penetration testers, geeks, ethical hackers and electronics enthusiasts. This pocket-sized device combines a multitude of tools: RFID, RF, IR, HID emulation, GPIO, hardware debugging, 1-wire, Bluetooth, and more. Flipper Zero is a standalone device with a small LCD screen and a 5-way navigation button. It can be expanded, modified, and updated as needed by connecting to a computer or Android/iOS app. Flipper Zero is a ready-to-use platform out of the box. The device can act as a universal remote control for almost any device. Simply select the connection mode, put Flipper in reading mode, and press the button on the remote control of the corresponding device to scan and store its code. From now on, you can control this device by selecting it from the list of devices stored in Flipper Zero’s memory.
Specifications:
- Display: monochrome LCD 128x64px 1.4" (with backlight)
- Controls: 5-way keypad + select button
- Battery: Battery: Li-Pol 2000 mAh (7 days without charging)
- Processor:
- STM32WB55RG
- ARM Cortex-M4 32-bit 64MHz
- ARM Cortex-M0+ 32 MHz
- Buzzer: 100 Hz to 2500 HZ
- Vibration motor
- Memory: 1024kB Flash, 256kB SRAM
- Memory: microSD (up to 64 GB, not included)
- Connection: 1: USB 2.0, Type-C
- Modules:
- RF:
- RF: TICC1101
- frequencies: 315 MHz, 433 MHz, 868 MHz, 915 MHz
- TX power: max. 0 dBm (transmission distance up to approx. 100 m)
- RFID:
- 13.56MHz:
- ISO-14443A/B
- NXP Mifare Classic/Ultralight/DESFire/etc.
- FeliCa
- NFC Forum Protocols
- 125kHz:
- modulation: AM/PSK/FSK
- supported cards: EM400x, EM410x, EM420x
- HIDProx, Indala
- T5577
- GPIOs:
- 3.3V CMOS level
- 5V tolerance
- up to 20 mA for each digital pin
- Infrared rays:
- RX/TX frequency: 800 nm to 950 nm
- transmission power: 0 dBm max.
- RX sensitivity: -96 dBm
- transfer speed: 2 Mbps
- iButton 1-Wire:
- Dallas DS1990A
- DIGITAL
- Dimensions: 100 x 40 x 25 mm
- Weight: 102 g
Included:
- Pinball Zero
- USB A to USB C cable
