Все о продукте
Ability to change color Spectrum PLA Thermoactive is a filament made from pure PLA doped with a thermochromic pigment base. This is a very original additive, due to which the additively manufactured elements change their color when exposed to a certain temperature. In the case of Spectrum PLA Thermoactive, this is a color change from red to cream when the surface temperature of the element exceeds 30°C. . When the element reaches the initial temperature, the color gradually returns to the previous one. Packaging The filament is wound on a transparent, design coil. The spool contains information about the material type, diameter and recommended printing temperature. Each coil is vacuum packed with desiccant. Paper manual inside. All in the original Spectrum Filaments foil-wrapped cardboard box. CHECK YOUR RITE3D filament is produced by free extrusion. This is one of the most difficult extrusion processing methods, due to the particularly high influence of the process parameters on the product dimensions and material homogenization. During the production of Spectrum Filaments, every 1mm of material is continuously measured in 2 axes with an accuracy of ±0.8. µm, which makes it possible to obtain a high-quality final product. As proof of this, Spectrum Filaments, as one of the few manufacturers in the world, has implemented the ability to provide online the individual parameters of each coil produced: diameter diagram along the entire length of the filament, average diameter of the entire coil, ovality, standard deviation. Accurate tests ensure that "Spectrum Filaments "products would meet strict market requirements.
