DEWALT. Kit COMBO 18V DCK2052H1E1T (DCD805+DCF850) 1x5.0Ah 1x1.7Ah POWERSTACK TSTAK

Все о продукте

COMBO 2 18V Cordless Tool Set DeWalt DCK2052H1E1T TSTAK II Case:

CORDLESS DRIVER 1/4" 18V XR DEWALT DCF850:

• with a powerful motor with a torque of up to 208 Nm, designed to handle even the most difficult assembly tasks,
• due to less friction, the brushless motor has lower energy losses - it can run longer on a single battery charge and last much longer,
• very compact, compact design allows you to work freely even in places with limited access,
• 3-speed speed regulation allows you to accurately select the parameters suitable for the work being performed,
• precise screwing mode provides extra control to avoid damaging the material and the fastener,
• overload protection ensures constant speed under load,
• the light ring with three LEDs always ensures very good visibility of the working area,
• 1/4" (6.35 mm) hex bit holder allows quick attachment of bits,

DEWALT DCF850 IMPACT DRIVER SPECIFICATIONS:

• supply voltage 18V XR,
• Li-Ion battery type,
• rotation speed in 1st idle gear : 0-1000 rpm.
• rotation speed in 2nd idle gear : 0-2800 rpm.
• rotation speed at 3 idle speeds : 0-3250 rpm,
• running frequency at idle speed : 0-3800 rpm.
• maximum torque : 208 Nm,
• tool holder : 1/4" hex
• dimensions (L x W x H): 100 x 65 x 200 mm,
• weight (without battery) : 0.95 kg

18V XRP DEWALT DCD999 3 SPEED IMPACT DRILL/DRILL:

• a drill/screwdriver with a metal, 3-speed, durable drive, which, together with a 15-speed clutch, allows you to perform very precise screw-driving work,
• The DCD999 is one of the most powerful cordless drills on the market, with a torque of 112 Nm,
• with a mechanical impact that allows drilling in brick, stone or concrete,
• equipped with a modern, durable and efficient BL51LR brushless motor
• the rotation speed is regulated by a switch, which allows you to fully control the work being done,
• the gearbox contains only metal gears, which ensures the durability and longevity of the machine,
• the drill/screwdriver has an LED diode with 3-position tilt adjustment, which allows comfortable illumination of the workplace,
• has an ergonomic, rubberized handle and a metal belt clip,
• slide-in battery holder allows quick installation and replacement,

TECHNICAL DATA OF DEWALT DCD999 DRILL/DRIVER:

• supply voltage : 18V ,
• Battery type : Li-Ion ,
• idle speed:
  • 1st gear : 0-450 rpm .
  • 2nd gear : 0-1300 rpm .
  • 3rd gear : 0-2000 rpm .
• beat frequency:
  • Gear 1 : 0-8500 bpm ,
  • Gear 2 : 0-25500 bpm ,
  • Gear 3 : 0-38250 bpm ,
• maximum torque:
  • hardness : 112 Nm,
  • soft : 66 Nm,
• drill chuck: quick release,
• drill chuck range: 1.5-13 mm,
• maximum drilling diameter:
  • in wood: 55 mm,
  • metal: 15 mm,
  • in the wall: 16 mm,
• weight without battery : 1.61 kg,
• dimensions: 213 x 208 x 70

Equipment of the DCK2052H1E1T kit:

• DCF850 impact driver,
• XRP DCD999 3 Speed Impact Drill/Driver,
• 1 18 V Li-Ion XR 1.7 Ah battery, DCBP034 ,
  
• 1 18 V Li-Ion XR 5.0 Ah battery, DCBP518 ,
• DCB1104 multi-voltage charger,
• TSTAK II gearbox.

DeWalt has introduced a 3-year European power tool warranty that is valid after registering on the DEWALT website.

PHU A/B/C is an authorized representative of the DeWalt brand and operates an authorized service center.

All DeWalt power tools can be repaired by sending them to our Service Center A/B/C .