eXtreme Soldering bath DZ-70504

Все о продукте

Soldering bath SJ-360A is intended for melting solder, pcb boards, soldering wire ends. It is used to maintain the temperature during small soldering operations. Suitable for use with solder containing lead. Made of stainless steel.

Users manual:

1. Put the solder in the bath.
2. Insert the power cord into the outlet.
3. Set the heating temperature.
4. Turn on the power button.

Technical information:

• 100W power
• Temperature 200 - 480 °C
• Average melting time: about 8 min
• Holds about 250 g
• Diameter 36 mm
• Input voltage: 230V AC

General description:

• It is normal if there may be some smoke when using for the first time.
• Set the maximum temperature during use. After the metal is finally melted, use 4 to 7 temperature adjustment divisions.
  
• To stop work for a while, set the temperature regulator in divisions 1 to 3, it all depends on how much the device will not be used.
• It is dangerous to leave the device on unattended!
• It is recommended to ground the device and not connect it without metal in the tank.
• If the device is not working, check the fuse.