Главная > Инструменты и DIY>Режущие инструменты>Пильные диски>Graphite Graphite cutting guide rail (2 x 700 mm guide rails, connector, 2 clamps)
Graphite Graphite cutting guide rail (2 x 700 mm guide rails, connector, 2 clamps)
Graphite Graphite cutting guide rail (2 x 700 mm guide rails, connector, 2 clamps) – 2
Graphite Graphite cutting guide rail (2 x 700 mm guide rails, connector, 2 clamps) – 3
-4%
Graphite Graphite cutting guide rail (2 x 700 mm guide rails, connector, 2 clamps)
Graphite Graphite cutting guide rail (2 x 700 mm guide rails, connector, 2 clamps)
Graphite Graphite cutting guide rail (2 x 700 mm guide rails, connector, 2 clamps)
Graphite Graphite cutting guide rail (2 x 700 mm guide rails, connector, 2 clamps)
Graphite Graphite cutting guide rail (2 x 700 mm guide rails, connector, 2 clamps)
Graphite Graphite cutting guide rail (2 x 700 mm guide rails, connector, 2 clamps)
Graphite Graphite cutting guide rail (2 x 700 mm guide rails, connector, 2 clamps)
Graphite Graphite cutting guide rail (2 x 700 mm guide rails, connector, 2 clamps)
Graphite Graphite cutting guide rail (2 x 700 mm guide rails, connector, 2 clamps)

Оттенок товара и его реальный цвет могут отличаться от того, что показано на фотографии, так как изображения носят иллюстративный характер. Описание товара является общим и может не включать все его характеристики.

Graphite Graphite cutting guide rail (2 x 700 mm guide rails, connector, 2 clamps)

70,62 €
67.73 €
Мес. плата от 2,64 €
1813407

58G495-732

Доставка 8-13 р.д.

Вас заинтересовал этот товар?
(Прочитать условия обслуживания)

Все о продукте

Two 700mm long GRAPHITE branded rails allow for precise control of the GRAPHITE 58G495. High-quality aluminum sheets must have a rubber anti-spray insert, a special anti-slip tape attached to the bottom of the tables, and Teflon sliding devices to help control the sprayer smoothly. When used for the first time, the rubber plate automatically adapts to the tool being used. It is possible to quickly connect two rails if the long elements are cut with a connecting element. Rails can be attached to the treated surface with special clamps that allow the user to focus only on controlling the airship to achieve the intended cutting effect. Using specially profiled grooves, the terminals do not interfere with work.