Toote toon ja tegelik värvus võivad erineda pildil kujutatust, kuna pildid on illustratiivse iseloomuga. Samuti on toote kirjeldus üldine ega pruugi sisaldada kõiki toote omadusi.
DFRobot Gravity, digital pressure sensor 1kg (10N)
30.02 €
3687533 AN-11280
5903351243193
Tarneaeg 11-18 t.p.
Kauba vastu huvi?
Kõik toote kohta
The Arduino pressure sensor works up to 1 kg. It is based on the HX711, it has a 24-bit analog-to-digital converter for direct connection of weighing and control applications to the Strain Sensor. The supply voltage of the converter is from 2.6 V to 5.5 V.
Specifications:
- Analog-to-digital converter:
- supply voltage: 2.6 to 5.5 V
- system: HX711
- two input channels
- active low PGA noise floor with selectable gain 32,64 and 128
- cell voltage regulator and ADC analog power supply
- the oscillator does not require any external elements
- Restarting
- simple digital control and serial interface: control via pins, no programming required
- select data range: 10 SPS or 80 SPS
- operating temperature: -40 °C to 85 °C
- Tension sensor:
- operating voltage from 5 V to 15 V
- measuring range: 1 kg (approx. 10 N)
- output frequency: 1 mV/V
- zero offset: 0.05/0.03% F.S
- zero offset temperature: 0.05 / 0.03% F. S / 10 °C
- zero output: ±0.1 mV/V
- input impedance: 1055 Ω ± 15 Ω
- output impedance: 1000 Ω ± 15 Ω
- overload: 200% F.S
- output: analog
- dimensions: 38 x 33 mm
Included:
- 1x Tension sensor
- 1x Analog-to-digital converter
- 2x Gravity cable
Links:
Manual
