Toote toon ja tegelik värvus võivad erineda pildil kujutatust, kuna pildid on illustratiivse iseloomuga. Samuti on toote kirjeldus üldine ega pruugi sisaldada kõiki toote omadusi.
3D plastic ASA white 1.75mm 1kg refill pack Rosa3D
3684407 ASA-WHITE-175-1R-ROS
5907753136084
Tarneaeg 10-15 t.p.
Kõik toote kohta
ASA (acrylonitrile-styrene-acrylic) 3D printing material is resistant to UV rays, moisture and heat. Due to these properties, products printed from ASA can be operated outdoors, in the heat of the sun. Compared to ABS, ASA is easier to print, has less unpleasant odor, and shrinks less when the product cools. Products do not deform up to 94 ° C.
Printing recommendations
- extruder temperature 220-250°C
- substrate temperature: 90-110°C
For the initial adhesion of the product to the sole, it is recommended to use ASA sussensia (ASA plastic dissolved in acetone).
It is recommended to print in a closed chamber.
Parameters
color: white
diameter: 1.75 mm
weight: 1000 g (vacuum-packed)
Density: 1.07 g/cm3
odor: almost odorless
softening point: 94 °C (ASTM 1525)
diameter unevenness: +/- 0.05
ovality unevenness: +/- 0.02
elongation at break: 35 %
Tensile strength to break: 40 MPa
