Fermion - LCD IPS TFT 1.8" 128x160px SPI screen - DFRobot DFR0928
Fermion - LCD IPS TFT 1.8" 128x160px SPI screen - DFRobot DFR0928 – 2
Fermion - LCD IPS TFT 1.8" 128x160px SPI screen - DFRobot DFR0928 – 3
Fermion - LCD IPS TFT 1.8" 128x160px SPI screen - DFRobot DFR0928 – 4
Fermion - LCD IPS TFT 1.8" 128x160px SPI screen - DFRobot DFR0928 – 5
Fermion - LCD IPS TFT 1.8" 128x160px SPI screen - DFRobot DFR0928
Fermion - LCD IPS TFT 1.8" 128x160px SPI screen - DFRobot DFR0928
Fermion - LCD IPS TFT 1.8" 128x160px SPI screen - DFRobot DFR0928
Fermion - LCD IPS TFT 1.8" 128x160px SPI screen - DFRobot DFR0928
Fermion - LCD IPS TFT 1.8" 128x160px SPI screen - DFRobot DFR0928

Toote toon ja tegelik värvus võivad erineda pildil kujutatust, kuna pildid on illustratiivse iseloomuga. Samuti on toote kirjeldus üldine ega pruugi sisaldada kõiki toote omadusi.

Fermion - LCD IPS TFT 1.8" 128x160px SPI screen - DFRobot DFR0928

22.03
3603221

AN-21698

6959420922123

Tarneaeg 9-14 t.p.

Kauba vastu huvi?
(Lugege teenusetingimusi)

Kõik toote kohta

The TFT IPS LCD screen is based on the ST7735S controller, its diagonal is 1.8", and the resolution is 128x160px. A 4-pin SPI interface is used for communication. The integrated microSD memory card slot allows you to easily read color bitmaps from a memory card. The screen can be connected to the main module in two ways: standard connection via SPI or GDI (General Display Interface). The module can be easily connected to the FireBeetle using an FPC ribbon. The board operates from 3.3 V to 5 V and consumes up to 0.11 W of power.

Main features:
  • 128x160px resolution
  • 4-wire SPI interface
  • Integrated microSD card slot
Specifications:
  • Operating voltage: 3.3V to 5V
  • TFT viewing angle: 120°
  • Number of pixels: 128 columns x 160 rows
  • Interface: SPI
  • Interface type: GDI, contact connector
  • Controller chip: ST7735S
  • Power consumption: 0.11 W
  • MicroSD card slot
  • Operating temperature range: -10 °C to 60 °C
  • Screen area size: 26 x 35 mm
  • Module dimensions: 34 x 55 mm
  • Mounting hole spacing: 29 mm, 50 mm
  • Mounting hole diameter: 2 mm
Included:
  • 1x Fermion - LCD IPS TFT 1.8" 128x160px SPI screen - DFRobot DFR0928
  • 1x GDI cable
  • 1x 10-pin connector