Toote toon ja tegelik värvus võivad erineda pildil kujutatust, kuna pildid on illustratiivse iseloomuga. Samuti on toote kirjeldus üldine ega pruugi sisaldada kõiki toote omadusi.
GPIO I2C pin expansion and LED controller, AW9523, STEMMA AT/Qwiic, Adafruit 4886
21.35 €
3564565 AN-19252
5904422354787
Tarneaeg 8-15 t.p.
Kauba vastu huvi?
Kõik toote kohta
GPIO pin expansion and LED controller. The built-in AW9523 chip provides up to 16 additional GPIO inputs/outputs. Uses the I2C bus to communicate with connected elements. Thanks to the four possible I2C addresses, up to four expanders can be connected. Allows you to control LEDs with a range of 256 linear dimming levels. Powered from 2.5 V to 5.5 V.Specifications:
- Chip: AW9523
- Module type: pin expansion and LED controller
- Number of inputs/outputs: 16
- LED linear dimming: 256 steps in control mode
- GPIO configuration: independent, freely configurable
- Communication interface: I2C (address selectable via jumper AD1/AD0)
- I2C interface address:
- default: 0x58
- alternative: 0x59, 0x5A, 0x5B
- SDA, SCL, SHDN pins and all GPIOs can accept 1.8V logic input
- ESD protection: ±4000 V HBM (MIL-STD-883H Method 3015.8 standard)
- Power supply: 2.5V to 5.5V
- Pinouts:
- soldering fields
- STEMMA QT / Qwiic connectors
- Dimensions: 38 x 17.8 x 4.5 mm
- Weight: 2.5 g
- AW9523 LED Expansion and Controller Module
- Goldpin connectors - 2.54 mm
