Toote toon ja tegelik värvus võivad erineda pildil kujutatust, kuna pildid on illustratiivse iseloomuga. Samuti on toote kirjeldus üldine ega pruugi sisaldada kõiki toote omadusi.
Splitter Multiswitch 5/6 Spacetronik E-Series MS-0506E
2548323 MS0506E
5903031033441
Tarneaeg 11-14 t.p.
Kõik toote kohta
End multiswitch 5/6 Spacetronik E-Series MS-0506E
Multiswitch is designed to expand the internal antenna installation of DVB-S2 satellite and DVB-T/T2 terrestrial television systems. The device allows you to distribute satellite and terrestrial signals and connect to 6 sockets RTV-SAT subscribers, satellite receivers, DVB-T receivers, etc.
What should I connect the E series multi switch to?
Multiswitch automatically recognizes the type of signal that will be transmitted to the receivers. When installing, the multi-switch must be connected to a satellite antenna or terrestrial TV antenna with a diameter of at least 0.8 m. The satellite and terrestrial signals received from the multiswitch are separated using subscriber termination jacks. The Multiswitch is powered by an external power source, which eliminates the phenomenon of increased operating temperature, which is a common cause of device failure.
Where to install Spacetronik multiswitch?
When installing the device, take into account the current conditions of the power supply installation:
- a place away from the influence of weather conditions
- protection against unauthorized access
- adequate ventilation
Installation diagram
Installation of the Eco version of the Spacetronik multiswitch is very simple. On the left side of the multiswitch we can find 4 satellite signal inputs and 1 Terriestal input. On the right side is the power input jack. The remaining elements are combined signal outputs - SAT + DVB-T/T2
What can be connected to a multiswitch?
- one signal input from the Quattro SAT converter
- one DVB-T/T2 terrestrial signal input
- 6 combined SAT+DVB-T/T2 signal outputs
ATTENTION! Illustrative photo
5/6 multiswitch technical specifications
Number of entries: 4 SAT, 1 TUESNumber of outputs: 6
Connectors: F female
SAT frequency range: 950-2150MHz
TER frequency range: 47-694MHz
SAT gain: 0 to 6 dB
TER gain: 2 to 6 dB
TER and SAT isolation: 30 dB
SAT and TER isolation: 28 dB
H/V polarization separation isolation: 25dB
External TER isolation: 22dB
Isolation from SAT: 35dB
SAT reflection loss input: 10dB
SAT reflection loss output: 7dB
Reflection loss TER input: 11dB
Reflection loss TER output: 8dB
Output level SAT (IMD3 - 35 dB): 100 dBµV
Output level TER(IMD3 - 60dB): 88dBµV
Input/output impedance: 75Ohm
Power supply: max. 18 V
