Hismart Grindinio heating collector 5 circuits with thermal drives NC AC230V and flow meters

Underfloor heating collector for 5 circuits with thermal actuators NC AC230V and flow meters. The set includes: A recessed mounting metal box with a 5-circuit collector, flow meters, NC AC230V thermal actuators, and two drainage nodes.


Features:
The collector is used to control the water flow in heated floors. Each pipe of the underfloor heating system is connected to the collector, allowing for the regulation of water flow and heat quantity in each room of the building separately.
Electric thermal actuators are designed to control the heat distribution system of the heating equipment. They receive commands from automation devices (such as room thermostats or controllers) and regulate the distribution of water flow according to set parameters. With the help of thermal actuators, it is possible to accurately control the room temperature and reduce energy costs.
The status of the thermal actuators is NC (normally closed). The actuators work with programmable or non-programmable room thermostats that issue an alternating current signal. Simple installation, thermal actuators are connected to the collector via a VA80 thread adapter. The valve thread adapter VA80 allows easy connection to the standard thread M30, securely locking it. The energy consumption of each actuator is only 2W.
Flow meters (flow indicators) are included for monitoring water flow and pressure balancing. Manual control heads (5 pcs) are also included.
The collector cabinet is mounted on the wall, recessed installation. The doors with a latch are locked and open at approximately a 135-degree angle.


Technical specifications:
Collector cabinet:
Installation: recessed.
Dimensions: 640x640x118mm.
Depth: 110mm.
Door dimensions: 580mm x 580mm.
Number of flow meters: 5 pcs.
Number of thermal actuators: 5 pcs.
Drainage nodes: 2 pcs.
16mm pipe adapters for heating circuit: 5 pcs.
Color: light gray.

Thermal actuator:
Purpose: water heating system.
Type of operation of thermal actuators: NC (normally closed).
Operating voltage: AC 230V, 50/60Hz.
Starting current: max. 300mA.
Energy consumption: 2W.
Installation: connected to the collector via an adapter.
Adapter: VA 80.
Cable length: 90cm.
Operating temperature: 0°C~ +60°C.
Storage temperature: -25°C~ +65°C.
Operating humidity: < 80%RH (non-condensing).
Safety class: IP54.
Dimensions: Ø49.4mm x 56.6mm.


Warranty: 12 months.