Hismart Grindinio heating collector 6 circuits with thermal actuators NC AC230V and flow meters

Underfloor heating manifold with 6 circuits, equipped with thermal actuators NC AC230V and flow meters. The set includes: A recessed metal box with a 6-circuit manifold, flow meters, NC AC230V thermal actuators, and two drain nodes.


Features:
The manifold is used to control the water flow in underfloor heating systems. Each pipe of the underfloor heating system is connected to the manifold, allowing for the regulation of water flow and heat quantity in each room of the building separately.
Electric thermal actuators are designed to control the heat distribution system of the heating equipment. They receive commands from automation devices (such as room thermostats or controllers) and regulate the distribution of water flow according to set parameters. With the help of thermal actuators, it is possible to accurately control the room temperature and reduce energy costs.
The status of the thermal actuators is NC (normally closed). The actuators work with programmable or non-programmable room thermostats that issue alternating current signals. Easy installation, thermal actuators are connected to the manifold via a VA80 thread adapter. The VA80 valve thread adapter allows for easy connection to a standard M30 thread, securely locking in place. The energy consumption of each actuator is only 2W.
Included flow meters (flow indicators) are intended for monitoring water flow and pressure balancing. Manual control heads (7 pcs.) are also included.
The manifold cabinet is mounted on the wall, recessed installation. The doors with a latch open approximately at a 135-degree angle.


Technical specifications:
Manifold cabinet:
Installation: recessed.
Dimensions: 640x640x118mm.
Depth: 110mm.
Door dimensions: 580mm x 580mm.
Number of flow meters: 6 pcs.
Number of thermal actuators: 6 pcs.
Drain nodes: 2 pcs.
16mm pipe adapters for heating circuits: 6 pcs.
Color: light gray.

Thermal actuator:
Purpose: water heating system.
Type of operation for thermal actuators: NC (normally closed).
Operating voltage: AC 230V, 50/60Hz.
Starting current: max. 300mA.
Energy consumption: 2W.
Installation: connected to the manifold via an adapter.
Adapter: VA 80.
Cable length: 90cm.
Operating temperature: 0°C~ +60°C.
Storage temperature: -25°C~ +65°C.
Operating humidity: < 80%RH (non-condensing).
Safety class: IP54.
Dimensions: Ø49.4mm x 56.6mm.


Warranty: 12 months.