The product's shade and actual color may differ from what is shown in the picture, as the images are for illustrative purposes. The product description is general and may not include all the product's features.
S/FTP cat.6A network cable, twisted pair, LSOH, Dca 4x2x23 AWG, 10Gb/s, 10 years warranty, gray, 500m - Q-LANTEC
3723121 KIS6ALSOH500DQ
5904204406291
4-6 b.d.
High quality, designed for professional use, double shielded Q-LANTEC S/FTP category 6A data cable, with a transmission efficiency of not less than 10 Gbit/s (EA class).
Fully copper conductors, foil shielded pairs, additionally the entire conductor is shielded with a mesh. The cable is designed for use in environments where electromagnetic interference occurs.
Telecommunications cables of this type are intended for horizontal and vertical indoor installation in telecommunications networks and video surveillance systems. All Q-LANTEC cables comply with the CPR directive for the classification of construction products according to fire resistance and defining test methods for cables intended for installation in buildings.
Products come with a 10-year system warranty.
| CONSTRUCTION AND ELECTRICAL PARAMETERS | |
|---|---|
| Category | 6A |
| Class | EA (500 MHz standard) |
| AWG gauge | 4x2x23AWG |
| Conductor | single wire copper conductor with a diameter of 0.55 mm |
| Insulation | polyethylene |
| CPR fire classification (Euroclass) | Dca s2, d2, a1 |
| Center | 4 twisted pairs, each pair wrapped in polyester foil, additionally fully shielded with copper braiding |
| Shield | pairs, shielded with polyester foil, covered with an aluminum layer, under the shield - grounding wire made of tinned copper wire with a diameter of not less than 0.4 mm + mesh braiding |
| Jacket | Halogen-free material, flame retardant, emitting limited smoke and corrosive gas (LSOH/FRNC) |
| PoE | IEEE 802.3bt |
| Color | light gray |
| ELECTRICAL PROPERTIES at 20 °C | |
|---|---|
| DC resistance loop | ≤ 93.8 Ω/km |
| AC resistance | ≤ 2 % |
| Insulation resistance (500 V) | ≥ 5000 MΩ *km |
| Capacitance resistance at 800 Hz | nom. 48 nF/km |
| AC passive capacitance resistance | ≤ 1500 pF/km |
| Characteristic impedance (1–1000 MHz) | (100 ± 15) ohms |
| Nominal propagation speed (NVP) | 69% |
| Delay spread | Nominal current ≤ 535 ns/100 m |
| Delay angle | Nominally ≤ 20 ns/100 m |
| DC installation tester, 1 min. (basic) | 1000 V |
| Maximum operating voltage | 80 V |
| MECHANICAL PROPERTIES | |
|---|---|
| Bending radius | 4 x ø outside |
| Maximum pulling force | 80 north |
| Operating temperature range | From -30 °C to +75 °C |
| Installation temperature range | From -10 °C to +70 °C |
| Outer diameter | 7.5 mm +/- 0.5 mm |
| Weight kg/km | 55 |
| Packaging | reel (500 m) |