Toote toon ja tegelik värvus võivad erineda pildil kujutatust, kuna pildid on illustratiivse iseloomuga. Samuti on toote kirjeldus üldine ega pruugi sisaldada kõiki toote omadusi.
Friendlyarm NanoPi NEO v1.4 - Allwinner H3 quad core 1.2GHz + 512MB RAM - with connectors
3655486 AN-14633
5904422342531
Toodet pole enam laos
Kõik toote kohta
Miniature NanoPi computer in the Neo v1.4 version with an Allwinner H3 quad-core ARM Cortex-A7 1.2 GHz processor. The board has 512 MB DDR3 RAM, a built-in Ethernet port and USB + 2x USB Host sockets on 2.54 mm pins, 36 GPIOs, a microSD card slot. Works with the manufacturer's u-boot and UbuntuCore systems. The v1.4 version has a 4-pin audio interface, a 2-pin CVBS interface, supports IC power management and has holes for mounting a cooler.
NanoPi Neo minicomputer connection
The minicomputer has the basic communication interfaces that can be found on PC-class office computers. In addition to the previously mentioned audio and video connections, the user can use:
- 1x USB A + 2x USB Host connector on 2.54 mm contacts, to which you can connect, for example, a mouse, keyboard, WiFi card or storage device. If it turns out that there are too few sockets, you can increase their number using an external USB HUB. The pin interfaces can be connected with cables.
- Ethernet socket, i.e. the ability to connect directly to a LAN network.
- GPIO x 36 pin – general purpose outputs/inputs that can control LEDs, buttons, motor controllers. This includes pins that support the following interfaces: I2C, SPI and UART. You need to solder the pins yourself, gold pin strips with a pitch of 2.54 mm are available in our store.
- microSD slot – microSD memory card slot where the operating system can be installed.
NanoPi Neo power supply
The system uses a microUSB connector as a power source. The manufacturer recommends that the connector voltage be 5.0V, and the current efficiency of the power supply used be at least 2.0A. Our offer includes power supplies that meet these parameters.
Specifications:
- Model: NanoPi Neo
- Processor: Allwinner H3
- Core: Quad-core ARM Cortex A7
- Systems: u-boot, UbuntuCore
- Clock: 1.2GHz
- Memory RAM: 512 MB
- Memory: microSD card
- GPIO socket: 36-pin connector
- Power supply: 5V / 2A - microUSB
- Dimensions: 40x40mm
- USB: 1 x USB socket A, 2 x USB on 2.54mm pins
- Network interface: Ethernet 10/100 Mbps
- Video: -
- Audio: audio output and microphone, on GPIO connector
- Interface: UART, SPI, I2C, GPIO, PWM
- Debugger: Serial port 4-pin / 2.54mm
- Additional: Integrated LED, CVBS 2-pin interface, supports IC power management, radiator mounting holes
