-2%
Toote toon ja tegelik värvus võivad erineda pildil kujutatust, kuna pildid on illustratiivse iseloomuga. Samuti on toote kirjeldus üldine ega pruugi sisaldada kõiki toote omadusi.
PrimaCreator PrimaSelect Luvocom 3F PEKK 50082 - 1.75mm - 500g - natural
449,00 €
439.00 €
Kuumakse alates 12,20 €
3648122 PRM-6733
7340002118154
Tarneaeg 8-15 t.p.
Kauba vastu huvi?
Kõik toote kohta
Polyether ketone ketone (PEKK) is a semi-crystalline thermoplastic. It belongs to the polyaryletherketone family. Due to its high resistance to heat and chemicals and its ability to withstand high mechanical loads, it is well suited for the production of complex end-use parts. In addition, it is inherently flame retardant and has unique tribological properties.PEKK plastic has a controllable crystallization rate, allowing users of FFF or FDM 3D printers to benefit from both the exceptional performance of PEEK and the easier processing of amorphous materials. PEKK plastic is easier to process than traditional PEEK plastic and has better layer adhesion. At the same time, it offers similar strength and toughness material properties and better dimensional stability. PEKK has a glass transition temperature higher than PEEK at 15 °C.
LUVOCOM 3F PEKK 50082 is designed to outperform standard PEKK materials on the market. It has improved flow characteristics that improve processing and layer adhesion. This unique modified pure PEKK provides dimensional stability and can be processed in unheated chambers, resulting in semi-crystalline parts with low distortion.
Main features:
- Specially optimized for industrial 3D printing
- Isotropic shrinkage characteristics
- Non-flammable (UL94 V-0)
- Continuous operating temperature 255 °C
- Operating temperature 300 °C (over the entire service life max. 200h)
- Highly resistant to chemicals
- Low deformation PEKK plastic
- Type of thermoplastic: PEKK
- Diameter: 1.75mm
- Tolerance: 0.05mm
- Weight: 0.50 kg
- Length: 164 m
- Recommended printing temperature min.: 340 ºC
- Recommended printing temp. max.: 380 ºC
- Recommended print platform temperature min.: 110 ºC
- Recommended print platform temperature max.: 140 ºC
- Recommended printing speed min.: 20 mm/s
- Recommended print speed max.: 50 mm/s
- Specific density: 1.27 g/cm3, ISO 1183-3
- Mold Shrinkage: 1.0-1.6%
- Tensile strength: 90 MPa, ISO 527
- Tensile modulus: 3000 MPa, ISO 527
- Elongation: 5%, ISO 527
- Bending strength: 150%, ISO 178
- Modulus of elasticity: 2500, ISO 178
