Toote toon ja tegelik värvus võivad erineda pildil kujutatust, kuna pildid on illustratiivse iseloomuga. Samuti on toote kirjeldus üldine ega pruugi sisaldada kõiki toote omadusi.
BondTech DDX V3 Adapter Kit for CR-10v2 and CR-10v3
159.01 €
Kuumakse alates 4,99 €
3598446 PRM-7646
7350011414109
Tarneaeg 11-18 t.p.
Kauba vastu huvi?
Kõik toote kohta
CR-10S V2 and CR-10 V3 compatibility.To use this adapter kit on the printer models mentioned above, you just need to set the default DDX V3 configurations.
All DDX hotend and platform leveling sensor adapters are compatible with this setup. Please note that when it comes to the platform level sensor, using one of our adapters will change the probe position. A firmware change may be required.
To use the DDX V3 on your CR-10 V2 or V3, a hotend upgrade is required.
Available options include Copperhead, Mosquito, Mosquito Magnum, Micro Swiss All Metal.
Before applying for the DDX mounting plate, install the hotend and hotend adapter inside the DDX V3.
Main features:
- Compatible with DDX v3, now even easier to install
- Install the direct drive eXtruder on the CR-10 v2 and CR-10 v3
- Plastic parts are made of PA12 (nylon) with SLS 3D printing process
- Better surface finish and higher resistance to operating temperatures
- Improved support for Bowden and Z-axis limit switches
- 1x 10079-5-T DDX 5015 fan shroud
- 1x 10079-65 DDX mounting plate for CR-10 v2
- 1x 10079-45 DDX Bowden mount (supplied with tapered thread to better fit metal threaded slide mount)
- 1x 10079-80 DDX Z sensor board for CR-120 v2
- 7x M3 square nut
- 2x M3x25 screw
- 2x M3x20 screw
- 2x M3x8 screw
