Toote toon ja tegelik värvus võivad erineda pildil kujutatust, kuna pildid on illustratiivse iseloomuga. Samuti on toote kirjeldus üldine ega pruugi sisaldada kõiki toote omadusi.
CSI-USB UVC adapter for IMX477 Raspberry Pi HQ camera, Arducam B0278
79.00 €
Kuumakse alates 2,93 €
3591035 AN-19276
5904422358358
Tarneaeg 4-6 t.p.
Kauba vastu huvi?
Kõik toote kohta
An adapter developed by Arducam for use with Raspberry Pi HQ. Allows you to connect the Raspberry PI HQ camera and other Arducam cameras with an IMX477 sensor with a CSI connector to, for example, a computer using a USB connection, so it can function as a webcam. The adapter is UVC compatible, so there is no need to install additional drivers for Windows, Linux and Mac.Main features:
- Allows you to convert Raspberry PI HQ or any other camera with IMX477 sensor into a USB camera without installing additional drivers
- It has two built-in microphones, so you can record video with sound
- Supports the resolution:
- 10 frames per second, 4056x3040
- 20 frames per second, 4K (3840x2160)
- 30 frames per second, 2592x1944 / 2560x1440
- 60 frames per second, 1080p
- 100 frames per second, 720p
- Has the same dimensions and spacing as the camera board. Connects to the module using the included cable
- Supports Raspberry Pi HQ camera and Arducam cameras with IMX477 sensor
- Data format: MJPG
- Supported resolutions:
- 4032x3040, 10 frames per second
- 3840x2160, 20 frames per second
- 2592x1944 / 2560x1440, 30 frames per second
- 1080p, 60 frames per second
- 720p, 100 frames per second
- Automatically controlled functions: saturation, contrast, brightness, white balance, exposure
- Compatible systems: Windows 7/8/10, Linux, Mac and Android with UVC
- Input signal: CSI 22 pins, 0.5 mm
- Output signal: ZHR-5 connector, 1.5 mm
- Input voltage: 5V
- Connection port: USB 2.0
- Current consumption: 200 mA
- Operating temperature: -20 °C to 75 °C
- Cable length: 1 m
- Hole spacing: 34 x 34 mm / 30 x 30 mm / 29 x 29 mm
- Dimensions: 38 x 38 mm
- UVC CSI adapter board
- 3.8 cm long 22-pin - 15-pin cable for Raspberry Pi HQ camera
- Cable 22 pins - 22 pins, 8 cm long, for Arducam cameras with IMX477 sensor
- 1 m long USB cable
- Set of gaskets, bolts and nuts
