Cabletech Gate remote control - replacement
Cabletech Gate remote control - replacement

Toote toon ja tegelik värvus võivad erineda pildil kujutatust, kuna pildid on illustratiivse iseloomuga. Samuti on toote kirjeldus üldine ega pruugi sisaldada kõiki toote omadusi.

Cabletech Gate remote control - replacement

17.92 €
3372193

PIL0401

5901436785644

Tarneaeg 9-13 t.p.

Kauba vastu huvi?
(Lugege teenusetingimusi)

Kõik toote kohta


Replacement remote control for round blue remote controls. No need to change the radio, the remote control will work with any device supported by this system.

The remote control must be programmed in the same way as the original remote control:
1. Press the selected PIL0401 button and hold for 5-6 seconds
2. Press the button on the working SMILO remote control three times in the second sequence (hold the remote control button for a second, pause for a second, hold the remote control button for a second...etc.)
3. Then press the PIL0401 button for one second, after about 10 seconds the remote control will start working.
Note: You must be in range of the receiver (close to the gate) when programming

You can also program the remote directly into the radio. To do this, press the teach button on the radio for 1 second, then hold the selected button on the remote control for three seconds.