Toote toon ja tegelik värvus võivad erineda pildil kujutatust, kuna pildid on illustratiivse iseloomuga. Samuti on toote kirjeldus üldine ega pruugi sisaldada kõiki toote omadusi.
Splitter Multiswitch Spacetronik Pro Series MS-0916CL 9/16C
3173486 5903031016147
Tarneaeg 8-11 t.p.
Kõik toote kohta
Spacetronik Pro Series MS-0916CL LTE Cascade Multi-Function Switch
Pro Series 9/9 x 16 Cascade Multiplexer with 8 SAT Inputs + 1 Antenna Antenna Input will allow you to split the signal in a collective installation to another Cascade or Rear Multiplexer and to 16 end users . Multiswitch is supplied with a high-class power supply that ensures stable operation of the device. The body and handles are made of the highest quality materials. A cascading multiswitch is a device that allows you to freely change the size of your network by adding additional devices. Separate multiswitches are connected by sequentially supplying signals from the loop outputs. If further expansion of the device is not planned, the last device in the cascade is the rear multiswitch. The signals from the tap outputs are in turn fed to the rear sockets, subscribers. Cascaded multiswitches can be placed on different floors of the building, which allows to significantly shorten the distance from the output of the multiswitch to the satellite receiver. Also, in the event of a possible failure, the cascade multiswitch can be quickly disconnected from the installation and replaced with a functional device, so the time of failure and its repair is limited to the necessary minimum.
Where to install Spacetronik multiswitch?
When installing the device, take into account the current conditions of the power supply installation:
- a place away from the influence of weather conditions
- protection against unauthorized access
- adequate ventilation
Parameters that distinguish Spacetronik multiswitches from competitors
- isolation in SAT and TV channels
- I/O separation
- dBuV output signal level
- attenuation in the return channel
- parameters - power supply
- power supply - power supply stability and additional TER power supply
What can be connected to a multiswitch?
- two signal inputs from the Quattro SAT converter
- one DVB-T/T2 terrestrial signal input
- 16 SAT+DVB-T/T2 combined signal outputs
9/16 multiswitch technical specifications
Number of entries: 8 SAT, 1 TUES
Number of outputs: 16
Connectors: F female
SAT frequency range: 950-2150MHz
TER frequency range: 47-694MHz LTE ready
SAT gain: -3 to 6 dB
TER gain: -8 to 1 dB
TER and SAT isolation: 28 dB
SAT and TER isolation: 28 dB
H/V polarization separation isolation: 25dB
External TER isolation: 22dB
Isolation from SAT: 35dB
SAT reflection loss input: 10dB
SAT reflection loss output: 7dB
Reflection loss TER input: 11dB
Reflection loss TER output: 8dB
Output level SAT (IMD3 - 35 dB): 100 dBµV
Output level TER(IMD3 - 60dB): 85dBµV
Input/output impedance: 75Ohm
