Kõik toote kohta
Bitrazis Notos Xtal For the 120 Notos, Bitspower has paid particular attention to efficient cooling and a reasonable price. The maximum speed of 1800 revolutions per minute allows the maximum air mass to be reached. With a good static pressure of 1.2mm H2O, the 120 Notos is also suitable for use in front of or behind the radiator. Rubber buffers in the corners of the fans ensure quiet operation, preventing vibration and unpleasant noises even at high speeds. For individual fan speed control, each fan must have a 4 ppm PWM connector that can be connected to the supplied PWM controller. Receives a signal from the PWM header on the motherboard and sequentially turns on the connected fans at the same speed. A 12V SATA connection is also required for power.Simple support with serial communication and RGB driverRGB lighting with eight LEDs per fan is integrated for personalization. You can use apps like ASUS AURA Sync, GIGABYTE RGB Fusion 2.0, MSI Mistic Light Sync, ASRock Polychrome, Biostar VIVID LED DJ and Razer Chroma to adjust the lighting. The provided RGB controller is connected to a 3-pin connector with a 5VDG assignment to the motherboard and a 12V SATA connector for power. A total of 8 fans can be connected to the driver and set with three switches. In addition, the fan can be directly connected to the motherboard using a 3-pin connector with 5VDG assignment. Additional fans can then be attached to it using serial communication. Simple support using serial communication and RGB driver RGB lighting with eight LEDs per fan is integrated for personalization. You can use apps like ASUS AURA Sync, GIGABYTE RGB Fusion 2.0, MSI Mistic Light Sync, ASRock Polychrome, Biostar VIVID LED DJ and Razer Chroma to adjust the lighting. The provided RGB controller is connected to a 3-pin connector with a 5VDG assignment to the motherboard and a 12V SATA connector for power. A total of 8 fans can be connected to the driver and set with three switches. In addition, the fan can be directly connected to the motherboard using a 3-pin connector with 5VDG assignment. Additional fans can then be connected via daisy-chaining.
