Loading...

Sharkoon Rebel P30 Gold power supply unit 1000 W 20+4 pin ATX ATX White
Sharkoon Rebel P30 Gold power supply unit 1000 W 20+4 pin ATX ATX White
Sharkoon Rebel P30 Gold power supply unit 1000 W 20+4 pin ATX ATX White
Sharkoon Rebel P30 Gold power supply unit 1000 W 20+4 pin ATX ATX White

The product's shade and actual color may differ from what is shown in the picture, as the images are for illustrative purposes. The product description is general and may not include all the product's features.

Sharkoon Rebel P30 Gold power supply unit 1000 W 20+4 pin ATX ATX White

268,50 €
Monthly payment from 7.81
2485018

4044951038534

4044951038534

This product is no longer in stock

You are interested in this product?
(Read terms of service)
Designed for performance, the Rebel P30 Gold is a power supply unit that is fully modular and certified with 80 PLUS Gold. With the new ATX 3.0 standard and a PCIe Gen5 12VHPWR connection, it offers full compatibility for high-end graphics cards. In addition, the PSU is supplied with LLC resonant-converter and DC/DC technology and is equipped only with high-quality Japanese capacitors. A quiet 135 mm fan with an intelligent Zero RPM mode provides the cooling as well as a low-noise operation.

Full Support for High-End Graphics Cards
The Rebel P30 Gold supports the new ATX 3.0 standard and is equipped with a modern PCIe Gen5 12VHPWR connection that is required for current high-end graphics cards and the highest performance.

Certified Safety and Efficiency
As its name suggests, the Rebel P30 Gold is 80 PLUS Gold certified, providing at least 90 percent efficiency at 20 percent load, 92 percent efficiency at 50 percent load, and an efficiency of 89 percent at 100 percent load. In addition, both the PSU and the user are safeguarded by all the common protective technology. This encompasses over-current protection, over- and under-voltage protection, short-circuit protection, over-temperature protection and over-power protection.

Always Cool and Quiet
A quiet 135 mm fan with a fluid dynamic bearing is used in the Rebel P30 Gold. For silent operation, the PSU's Zero RPM mode can be selected, allowing the fan rotation to be completely deactivated at moderate loads. To ensure an effective cooling for the hardware, the fan delay mode lets the fan continue to run for up to 60 seconds after the PSU has been shut down.

High Quality in Focus
For high degrees of reliability and performance, quality all-Japanese capacitors, LLC resonant converters and DC/DC technology are used in the Rebel P30 Gold. Thanks to this, the Rebel P30 Gold always delivers a constant and stable voltage with optimized noise and heat levels.

Full-Modular Assembly
All the Rebel P30's cables are modular and can be used as and when they are needed. Apart from a PCIe Gen5 12VHPWR connector, the PSU comes with a total of twelve SATA connectors and four 6+2-pin PCIe connectors. The 1,300-watt model even has up to eight 6+2-pin PCIe connectors. Two IDE connectors and a floppy connector are also available using the included adapters.
Power
Power protection features Over current, Over voltage, Overheating, Short circuit, Under voltage
Maximum input current (@110V) 12 A
Combined power (+3.3V) 120 W
Combined power (+12V) 1000 W
Combined power (+5V) 120 W
Max output current (+3.3V) 24 A
Max output current (+12V) 83.3 A
Max output current (+5V) 24 A
Max output current (+5Vsb) 3 A
Max output current (-12V) 0.5 A
AC input voltage 100 - 240 V
AC input frequency 50/60 Hz
Maximum input current (@220V) 6 A
Total power 1000 W
Performance
Mean time between failures (MTBF) 100000 h
ATX version 3.0
Purpose PC
80 PLUS certification 80 PLUS Gold
Power supply unit (PSU) form factor ATX
Design
Product colour White
Number of fans 1 fan(s)
Fan diameter 13.5 cm
Fan location Top
Cooling type Active
On/off switch Yes
Ports & interfaces
Floppy drive power connector 1
Number of SATA power connectors 12
Peripheral (Molex) power connectors (4-pin) 2
ATX power connector (20+4 pin) Yes
CPU power connector (4+4 pin) Yes
PCI Express power connectors (6+2 pin) 4
Motherboard power connector 20+4 pin ATX
Cabling type Fully-Modular
Floppy disk drive connector Yes
Motherboard power cable length 62 cm
Peripheral (Molex) power cable length 550 mm
Operational conditions
Operating temperature (T-T) 0 - 50 °C
Weight & dimensions
Weight 1.7 kg
Width 150 mm
Depth 160 mm
Height 86 mm
Technical details
Sustainability certificates ErP
Packaging content
Cables included AC
Certificates
Compliance certificates CE, Federal Communications Commission (FCC), UKCA, CB