King Hoff JUICE POT KINGHOFF KH-3302 SUITABLE FOR INDUCTION

New and original packed JUICER 8.0L , consisting of 4 KINGHOFF elements.
Made of high quality polished stainless steel.

Purpose :

A juicer is a device for obtaining pasteurized juice from various types of fruit.

The juicer consists of four main parts:

- water tank 4.5L 26 x 11cm, wall thickness 0.5mm
- 2.5L juice container 26 x 16cm, wall thickness 0.6mm
- fruit container 8.0L 26 x 16cm, wall thickness 0.5mm
- glass cover 4mm.

In addition, the juicer comes with a discharge tube, a silicone hose and a Mohre clamp. Each container has handles.
The water container is the base of the juicer. It has a well-shaped side on the top that allows you to set the juice container.
The juice container has a hole in the middle of the bottom, in which a part of the so-called pipe is permanently installed. "Fireplace".
In the lower part of the side of the container there is a drain pipe, installed in a rubber gasket and finished with a clamp that closes it.
A fruit container is mounted on the periphery of the side of the container. There are small symmetrical holes on the sides and bottom of the Ha fruit container.
All this is covered with a glass cover.

Get the juice:

- fill the water tank 2/3 full of water.
- place the juice container, hang the outlet pipe with the press handle behind the handle of the container,
- pour the washed fruit freely into the fruit container, filling it. the right amount of sugar
- put the cover back on.

Place the juicer prepared in this way on a gas, electric or coal stove and heat it in the oven for a certain time.
depending on the type of fruit used. Give as much heat as possible until it boils.
As soon as vapor clouds appear, the heat supply should be reduced. When the juice stops flowing from the fruit, pour the juice from the replaced fruit,
sterilized bottles by releasing the clamp and tighten the hose again when the bottles are full.
The juicer can be used on all types of stoves and is dishwasher safe.