Produkta tonis un faktiskā krāsa var atšķirties no attēlā redzamā, jo attēli ir ilustratīvi. Produkta apraksts ir vispārīgs un, iespējams, tajā nav iekļautas visas produkta īpašības.
Gravity - DAC 2-channel 4-20mA I2C digital-to-analog converter - DFRobot DFR0972
29.00 €
3600789 AN-22277
6959420922826
Piegāde 11-18 d.d.
Šī prece Jūs ieinteresēja
Viss par produktu
Digital-to-analog converter with Gravity serial connector. It has two channels - one with a current output from 0 mA to 25 mA, and the other - for connecting a 18-24 V DC power supply. The converter is compatible with Arduino, so it can be used with various peripherals, such as light controllers, inverters, valves and pumps. The maximum resistance of the 18 V power supply is 450 ohms, and 24 V - up to 750 ohms. Main features:
- Equipped with GP8403 chip
- Stable output current with small, up to 0.2% error after calibration
- Wide supply voltage range from 18 V to 24 V DC
- Has a Gravity connector and uses an I2C bus for communication
- Consumes less than 5 mA of current
Specifications:
- Converter type: digital-to-analog DAC
- Supply voltage range: 18 V to 24 V DC (24 V recommended)
- Communication interface: I2C bus
- I2C address: 0x58
- Built-in chip: GP8403
- Input signal: 12 bits from 0x000 to 0xFFF (0-25 mA)
- I2C input signal level: 2.7 V to 5 V
- Accuracy: 0.5% before calibration; 0.2% after calibration
- Current consumption: < 5 mA
- Start-up time: < 2 ms
- Operating temperature range: -40 °C to 125 °C
- Load resistance: maximum resistance 450 Ω when powered by 18 V, maximum resistance 750 Ω when powered by 24 V
- Output current: 0 mA to 25 mA
- Standard connector: PH2.0-4P+ Gravity connector
- Module dimensions: 35 x 32 x 13.9 mm
Included:
- Gravity - DAC 2 channels 4-20mA I2C
- Cable with Gravity connector
