Produkta tonis un faktiskā krāsa var atšķirties no attēlā redzamā, jo attēli ir ilustratīvi. Produkta apraksts ir vispārīgs un, iespējams, tajā nav iekļautas visas produkta īpašības.
Ekwb Ek Water Blocks EK Water Blocks EK-Loop OmniLink 6-Pin-Stromkabel (dual PWM)
13.60 €
2590360 3831109897829
3831109897829
Piegāde 9-14 d.d.
Šī prece Jūs ieinteresēja
Viss par produktu
Product Description The EK-Loop OmniLink 6-pin Power Cable (Dual-PWM) is the starting point for OmniLink wiring with the required 6-pin power, D-RGB and two 4-pin PWM connectors. The OmniLink cable allows easy transmission and distribution of +12V and +5V power, PWM, TACHO and D-RGB signals. The sleek black ribbon cable allows for easy cable integration and management. The EK-Loop OmniLink 6-pin power cable does not consume power through the motherboard/controller connections because the +5V and +12V are connected directly to the power supply. This increases the maximum current to 8.5A for D-RGB and 8.5A for fans/pumps. The 6-pin power cable is compatible with all EK OmniLink products, common 4-pin PWM fan/pump motherboard headers, and common 5-VD RGB (ARGB) connectors used by most mainboards. Manufacturers used. The cable's 6-pin power connector must be manually assembled according to the pinout of the desired power supply, as it connects directly to the peripheral/SATA power output of the modular power supply. The cable must be used with the EK-Loop OmniLink Pump PWM signal splitter to get the correct TACHO values, as the TACHO signal is connected to the unit to measure the speed, which is controlled by the PWM2 signal. This means that the user cannot receive TACHO readings from devices controlled by the PWM1 signal Item no.: 100042561| Type | Cable | ||
| Color | black | ||
| EAN | 3831109897829 | ||
| Application example | +12V and +5V power distribution, PWM, TACHO, D-RGB signals | ||
| Area | feed | ||
| Cable cross-section | 20AWG | ||
| taps | 5 | ||
| Characteristics | internal | ||
| Further information | Micro-Fit 3.0 8-pin socket > 1x 6-pin power connector (pin assignment depends on power source) + 1x 4-pin PWM 1-source fan socket (empty, empty, TACHO, PWM) + 1x 4-pin -PWM 2-source fan socket ( PWM signal only) + 1x 3-pin D-RGB LED source connector (data line only) | ||
| To notice | TACHO signal only on the port labeled PWM 2, the port labeled PWM 1 is a standard port available on other OmniLink splitter cables. EK-Loop OmniLink 6-Pin Power (Dual PWM) is required to control the secondary PWM signal. | ||
| Attachments | available | 6 pin power connector | |
| Cable length | 50 cm | ||
