KNX system control and monitoring interface using USBDescription The KNX-USB interface allows communication between the KNX bus and a computer, which allows programming and monitoring devices in the KNX system using the ETS program. The KNX-USB interface also supports the bus logging mode, when events generated on the KNX bus are saved in the non-volatile memory of the interface. The KNX-USB Soft software allows you to enable/disable the bus logging mode and manage the interface memory. Local and remote control For daily control of both systems, you can use touch keypads, such as INT-TSI, which are part of the alarm system. This allows you to optimize costs, as there is no longer a need for two separate control devices. The INTEGRA CONTROL mobile application allows you to intuitively control the alarm system and some functions of the KNX system. Why choose INTEGRA with KNX? It is a solution for people looking for something more than a standard alarm system or KNX functions. The ability to expand the functions of both systems due to the synergy effect. Reducing all installation costs. The ability to meet even the most complex requirements. Specification USB voltage: 5V DC USB current consumption: Maximum USB power consumption: 0.3 W USB port type: Mini USB type B KNX bus voltage: 20 ~ 30V DC KNX bus current consumption: Maximum KNX bus power consumption: 0.6 W OTHER PARAMETERS: Maximum USB cable length: 5 m Operating temperature: -5°C ~ 45°C Protection class: IP20 Weight: 108g Dimensions (width/height/length): 67x34x21mm
